All products -- Dee Rings
Myler Dee Ring Bit MB02
$224.99 $249.00
Myler Stainless Steel Dee without Hooks, MB 02 Comfort Snaffle Wide Barrel, Level 1
The MB 02 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits. The MB 02 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™.
Independent Side Movement™
Stainless Steel mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
USEF Dressage Legal, 2019. Consult rulebook for more information.
Notes: The mouthpiece is similar to the MB 02 but the center barrel of the MB 01 is narrower, which concentrates pressure on the center of the tongue more than the MB 02. For more tongue relief, step up to the MB 04.
The dee without hooks is a traditional "D" shaped cheek with fixed attachment of the mouthpiece. This style keeps the mouthpiece from draping on the tongue, providing a more direct signal than the loose ring. The straight side of the dee will not pull through the mouth and does not pinch.
Size: 3 ¾" dee on 5", 5 1/4" and 5 1/2" mouthpiece, 3" pony dee on 4 3/4" mouthpiece
Action: Direct
Notes: For a more versatile version of the cheek piece, see the English dee with hooks or the eggbutt with hooks.
Myler Dee Ring Bit MB04
$189.99 $263.00
Myler Stainless Steel 3 3/4" Dee without Hooks, MB 04 Low Port Comfort Snaffle, Level 2
3" Dee on Pony Sizes
The MB 04 is similar to the MB 02 in that it will rotate on the tongue and apply tongue pressure, however, it has a small (¼") port that introduces some tongue relief to the horse. The port allows the horse to swallow and move his tongue when he is moving forward and relaxed, which acts as a release or reward. The mouthpiece is curved, and it wraps around the bars and lips instead of pinching.
Independent Side Movement
Stainless Steel Mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
USEF 2012 and FEI 2016 Dressage Legal. Consult rule book for more information.
Notes: The MB 04 provides an excellent transition from Level One to Level Two. It is suitable for a wide range of horses including green horses, experienced horses entering the Myler System, horses that have been ridden exclusively in a single-jointed mouthpiece, or horses that have not been ridden for a while needing re-schooling.
The dee without hooks is a traditional "D" shaped cheek with fixed attachment of the mouthpiece. This style keeps the mouthpiece from draping on the tongue, providing a more direct signal than the loose ring. The straight side of the dee will not pull through the mouth and does not pinch.
Size: 3 ¾" dee ring on 5" and 5 1/2" mouthpiece, 3" dee ring on pony sizes 4 1/4", 4 1/2", 4 3/4"
Action: Direct
Discipline: Mainly English
Notes: For a more versatile version of the cheek piece, see the dee with hooks or the eggbutt with hooks.
4.5", 5", 5.5"
4.25" & 4.75" Available by special order
Happy Mouth Double Jointed Pro King Dee Bit
$99.99
Featuring an enticing apple scented mouth piece, horse and ponies alike are guaranteed to love them. All Happy Mouth bits are made with the same high tech materials, making them soft, gentle and comfortable for your horse.
Happy Mouth Double Jointed Pro King Dee
Happy Mouth Mullen Mouth King Dee
$99.99
Featuring an enticing apple scented mouth piece, horse and ponies alike are guaranteed to love them. All Happy Mouth bits are made with the same high tech materials, making them soft, gentle and comfortable for your horse.
Happy Mouth King Dee with shaped mullen mouth
Happy Mouth® Copper Roller Pro King Dee Bit
$119.99
Pure copper is a soft, warm metal. By using 99.9% pure copper in the center of the mouthpiece, bit acceptance is improved. The taste of copper encourages horses to salivate and keep a moist mouth. Bits made of copper can have a very positive effect by promoting relaxation and softening. Excellent bit acceptance can be achieved by this combination of Apple scented space age polymer mouthpiece and pure copper center roller. The Happy Mouth® Pro King Dee Bits feature a more traditional-looking Dee Ring cheek which is more desirable in the hunter and equitation arenas.
Happy Mouth Roller Mouth King Dee
$109.99
Featuring an enticing apple scented mouth piece, horse and ponies alike are guaranteed to love them. All Happy Mouth bits are made with the same high tech materials, making them soft, gentle and comfortable for your horse.
Happy Mouth King Dee with double jointed roller mouth.
Happy Mouth Shaped Mullen Mouth Pro King Dee
$119.99
Featuring an enticing apple scented mouth piece, horse and ponies alike are guaranteed to love them. All Happy Mouth bits are made with the same high tech materials, making them soft, gentle and comfortable for your horse.
Happy Mouth Pro King Dee ring with shaped mullen mouth
Centaur Eco Pure Rubber Mouth King Dee Bit
$57.99
Safe for Your Horse & Mother NatureCompared to Standard Rubber Mouth Bits:· A Refined Thinner Mouth· Better Strength and Abrasion Resistance· Environmentally Friendly - Engineered with Materials that pass REACH’s Strict Standards
Happy Mouth Jointed Pro King Dee Bit
$119.99
Featuring an enticing apple scented mouth piece, horse and ponies alike are guaranteed to love them. All Happy Mouth bits are made with the same high tech materials, making them soft, gentle and comfortable for your horse.
Happy Mouth Pro King Dee with jointed mouth.
Happy Mouth Single Jointed King Dee
$99.99
Featuring an enticing apple scented mouth piece, horse and ponies alike are guaranteed to love them. All Happy Mouth bits are made with the same high tech materials, making them soft, gentle and comfortable for your horse.
Happy Mouth King Dee with jointed mouthpiece.
Happy Mouth Ribbed Mouth Pro King Dee
$99.99
Featuring an enticing apple scented mouth piece, horse and ponies alike are guaranteed to love them. All Happy Mouth bits are made with the same high tech materials, making them soft, gentle and comfortable for your horse.
Happy Mouth Pro King Dee Ring with ribbed bar mouth.
Myler Dee Ring Bit MB03
$238.99 $266.00
Myler Stainless Steel Dee without Hooks, MB 03 Comfort Snaffle with Copper Roller, Level 1
The MB 03 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits with an added copper roller. The MB 03 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™.
Independent Side Movement
Stainless steel mouthpiece
Curved Mouthpiece
Copper Inlay
NOT dressage legal
Notes: The MB 03 is identical to the MB 02 except for a copper roller on the center barrel which can comfort horses that are restless or nervous. For more tongue relief, step up to the MB 04.
The dee without hooks is a traditional "D" shaped cheek with fixed attachment of the mouthpiece. This style keeps the mouthpiece from draping on the tongue, providing a more direct signal than the loose ring. The straight side of the dee will not pull through the mouth and does not pinch.
Size: 3 ¾" standard dee ring on 5" mouthpiece
Action: Direct
Notes: For a more versatile version of the cheek piece, see the English dee with hooks or the eggbutt with hooks.
Myler Dee Ring Bit MB01
$224.99 $249.00
Myler Stainless Steel Dee without Hooks, MB 01 Comfort Snaffle with Narrow Barrel, Level 1
The MB 01 is the Myler alternative to the traditional single-jointed mouthpiece commonly used in snaffle bits. The MB 01 rotates onto the tongue to apply concentrated tongue pressure at the center barrel, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional single-jointed mouthpiece. However, the barrel distributes the pressure more kindly and allows for each side of the bit to be used independently.
Independent Side Movement™
Stainless Steel mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
USEF Dressage Legal, 2019. Consult rulebook for more information.
Notes: The mouthpiece is similar to the MB 02 but the center barrel of the MB 01 is narrower, which concentrates pressure on the center of the tongue more than the MB 02. For more tongue relief, step up to the MB 04.
The dee without hooks is a traditional "D" shaped cheek with fixed attachment of the mouthpiece. This style keeps the mouthpiece from draping on the tongue, providing a more direct signal than the loose ring. The straight side of the dee will not pull through the mouth and does not pinch.
Size: 3 ¾" dee ring on 5" mouthpiece, 3" pony dee ring on 4 ½" mouthpiece
Action: Direct
Notes: For a more versatile version of the cheek piece, see the English dee with hooks or the eggbutt with hooks.
4.5", 5"
Myler Dee Ring Bit w/ Hooks MB33
$254.99 $284.00
5" and 5 1/2" sizes: You are seeing a brand new design for this cheekpiece. Please be aware that some retailers may not have this style in stock yet so you may receive the original design.
Myler Stainless Steel Dee with Hooks, MB 33 Medium Wide Ported Barrel, Level 3
The MB 33 is the mildest Myler mouthpiece in terms of tongue pressure. The generously wide port allows room for the tongue to pass almost completely under the bit. Because this mouthpiece does not rotate on to the tongue and the port is wide, it applies little to no tongue pressure, working primarily off the lips and bars. The port on this mouthpiece is only 1 ½" high, so it will apply little to no palate pressure. Because the MB 33 offers such a high degree of tongue relief, the horse that goes well in this mouthpiece has a trustworthy and consistent disposition, and is trained to work off the leg and seat as well as the hands.
Independent Side Movement
Stainless Steel Mouthpiece
Curved Mouthpiece
Copper Inlay
NOT Dressage Legal
Notes: For a slight increase in tongue pressure, see the MB 43LP or MB 43MP. For same tongue relief without Independent Side Movement, see the MB 16 (Western only). For the same tongue relief and Independent Side Movement, but with a slight degree of collapse, see the MB 05. For more generous tongue relief, see the MB 16PB.
The hooks make this a much more versatile version of the dee without hooks. Attaching the headstall to the top hook holds the bit in the correct position instead of allowing it to slide around the bridle cheek pieces. Attaching the reins to the rein hooks allow the rider to lift the cheek and use the Independent Side Movement™ of the mouthpiece. Using the hooks does not add leverage but allows the rider to transition from a direct rein action to indirect action without changing the bit. Adding a curb strap (using a Myler curb strap kit) incorporates curb pressure. Curb pressure is recommended for ported mouthpieces.
Size: 3 3/4" dee on 5" and 5 1/2" mouthpiece, 3" dee on 4 1/2" mouthpiece
Action: Direct rein action when reins are not attached through rein hook. Indirect rein action when rein is fixed on rein hook.
Discipline: Primarily English
Degree of Leverage: Little to no leverage when the hooks are used
4.5" 5", 5.5"
Myler Dee Ring Bit w/ Hooks MB32-3
$274.99 $305.00
Myler Stainless Steel 3 3/4" Dee with Hooks, MB 32-3 Triple Barrel, Level 2
The MB 32-3 is an innovative Myler alternative to the traditional mullen. It has three barrels which turn the mouthpiece from the typical solid bar of a mullen into a flexible bar which allows the horse to elevate his tongue and swallow more easily. When the reins are engaged, the mouthpiece becomes a solid bar like a traditional mullen, but with an exaggerated curve. This curved bar rotates across the bars and lips down on to the tongue, applying pressure across the entire surface of the tongue. The flexibility of the MB 32-3 makes it very forgiving and comforting when relaxed, but offers the rider control when engaged.
Independent Side Movement
Stainless Steel Mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
NOT Dressage legal
Notes: Because the tongue pressure applied by the MB 32-3 is evenly distributed across the entire tongue, this mouthpiece is considered "stronger" than the MB 04. However, its flexibility makes it a forgiving mouthpiece that works well for horses who have suffered mouth trauma or damage, or horses that tend to go behind the bit. For a ported mullen style offering more tongue relief, see the MB 06 or MB 36.
The dee with hooks is a stainless steel "D" shaped ring with fixed attachment of the mouthpiece, as well as slots (“hooks”) at the top and bottom of the ring for bridle and rein attachment. The small loop behind the top slot accommodates a curb strap (attach with two curb hooks). Both the top bridle slot and bottom rein slot on the standard and medium dee will fit standard ⅝" bridle leather. The slots on the pony dee will fit ¾" bridle leather.
The hooks make this a much more versatile version of the dee without hooks. Attaching the headstall to the top hook holds the bit in the correct position instead of allowing it to slide around the bridle cheek pieces. Attaching the reins to the rein hooks allow the rider to lift the cheek and use the Independent Side Movement™ of the mouthpiece. Using the hooks does not add leverage but allows the rider to transition from a direct rein action to indirect action without changing the bit. Adding a curb strap (using a Myler curb strap kit) incorporates curb pressure. Curb pressure is recommended for ported mouthpieces.
Size: 3 3/4" standard dee on 5" mouthpiece
Action: Direct rein action when reins are not attached through rein hook. Indirect rein action when rein is fixed on rein hook.
Discipline: Primarily English
Degree of Leverage: Little to no leverage when the hooks are used
Next
1 of 5