All products -- Dee Rings
Cavalier Klasse Nickle Free Oval Mouth Dee Ring
$84.99
Cyprium-90 nickel free Dee Ring with Stainless Steel cheeks and oval mouth.
Myler Dee Ring Bit MB06
$224.99 $249.00
Myler Stainless Steel 3 3/4" Dee without Hooks, MB 06 Mullen with Low Ported Barrel, Level 2-3
3" Dee on Pony Sizes
The MB 06 is a Myler alternative to the traditional mullen, but it has a wide low port that allows the tongue to pass under it comfortably. The port is ¾" high, just enough to allow the horse’s tongue to elevate slightly and swallow, but not high enough for palate pressure. When the reins are engaged, the 06 applies pressure primarily to the bars and lips.
Independent Side Movement
Stainless Steel Mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
USEF 2012 and FEI 2016 Dressage Legal. Consult rulebook for more information.
Notes: This mouthpiece is a step up in tongue relief from Level 2, but because the port is low, it does not offer as much tongue relief as other Level 2-3 mouthpieces with slightly higher ports because the tongue is still somewhat restricted. The MB 36 mouthpiece will offer more tongue relief than the MB 06 when the reins are relaxed, but more tongue pressure when the reins are engaged.
The dee without hooks is a traditional "D" shaped cheek with fixed attachment of the mouthpiece. This style keeps the mouthpiece from draping on the tongue, providing a more direct signal than the loose ring. The straight side of the dee will not pull through the mouth and does not pinch.
Size: 3 ¾" dee ring on 5" mouthpiece, 3" dee ring on pony 4 1/4", 4 1/2", 4 3/4" mouthpieces
Action: Direct
Discipline: Mainly English
Notes: For a more versatile version of the cheek piece, see the dee with hooks or the eggbutt with hooks.
5"
4.25", 4.5" 4.75" available by special order
Sprenger Duo D-Ring Bit - 16 mm
$189.99 $200.00
Very gentle on the horse‘s mouth, made of soft, flexible plastic
Can be used as straight bar or bar with space for the tongue
Mouthpiece is reinforced with a steel cable
Food-safe, solvent-free, contains no plasticisers
The lateral contact helps horses that tend to fall out whilst riding or approaching an obstacle
Allows direct pressure transmission on the tongue and lower jaw due to the fixed mouthpiece
Thickness: 16 mm
Ring-Ø: 75 mm
Myler Dee Ring Bit w/ Hooks MB06
$251.99 $280.00
Myler Stainless Steel 3 3/4" Dee with Hooks, MB 06 Mullen with Low Ported Barrel, Level 2-3
3" Dee on Pony Sizes
The MB 06 is a Myler alternative to the traditional mullen, but it has a wide low port that allows the tongue to pass under it comfortably. The port is ¾" high, just enough to allow the horse’s tongue to elevate slightly and swallow, but not high enough for palate pressure. When the reins are engaged, the 06 applies pressure primarily to the bars and lips.
Independent Side Movement
Stainless Steel Mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
NOT Dressage Legal
Notes: This mouthpiece is a step up in tongue relief from Level 2, but because the port is low, it does not offer as much tongue relief as other Level 2-3 mouthpieces with slightly higher ports because the tongue is still somewhat restricted. The MB 36 mouthpiece will offer more tongue relief than the MB 06 when the reins are relaxed, but more tongue pressure when the reins are engaged. For more overall tongue relief, see MB 43LP.
The dee with hooks is a stainless steel "D" shaped ring with fixed attachment of the mouthpiece, as well as slots (“hooks”) at the top and bottom of the ring for bridle and rein attachment. The small loop behind the top slot accommodates a curb strap (attach with two curb hooks). Both the top bridle slot and bottom rein slot on the standard and medium dee will fit standard ⅝" bridle leather. The slots on the pony dee will fit ¾" bridle leather.
The hooks make this a much more versatile version of the dee without hooks. Attaching the headstall to the top hook holds the bit in the correct position instead of allowing it to slide around the bridle cheek pieces. Attaching the reins to the rein hooks allow the rider to lift the cheek and use the Independent Side Movement™ of the mouthpiece. Using the hooks does not add leverage but allows the rider to transition from a direct rein action to indirect action without changing the bit. Adding a curb strap (using a Myler curb strap kit) incorporates curb pressure. Curb pressure is recommended for ported mouthpieces.
Size: 3 3/4" dee on 5" mouthpiece, 3" pony dee on 4 1/4", 4 1/2", 4 3/4" mouthpieces
Action: Direct rein action when reins are not attached through rein hook. Indirect rein action when rein is fixed on rein hook.
Discipline: Primarily English
Degree of Leverage: Little to no leverage when the hooks are used
5"
4.25", 4.5", 4.75" Available by Special Order
Myler Dee Ring Bit w/ Hooks MB03
$249.99 $277.00
Myler Stainless Steel Dee with Hooks, MB 03 Comfort Snaffle with Copper Roller, Level 1
The MB 03 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits with an added copper roller. The MB 03 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™.
Independent Side Movement
Stainless Steel Mouthpiece
Curved Mouthpiece
Copper Inlay
NOT Dressage Legal
Notes: The MB 03 is identical to the MB 02 except for a copper roller on the center barrel which can comfort horses that are restless or nervous. For more tongue relief, step up to the MB 04.
The dee with hooks is a stainless steel "D" shaped ring with fixed attachment of the mouthpiece, as well as slots (“hooks”) at the top and bottom of the ring for bridle and rein attachment. The small loop behind the top slot accommodates a curb strap (attach with two curb hooks). Both the top bridle slot and bottom rein slot on the standard and medium dee will fit standard ⅝" bridle leather. The slots on the pony dee will fit ¾" bridle leather.
The hooks make this a much more versatile version of the dee without hooks. Attaching the headstall to the top hook holds the bit in the correct position instead of allowing it to slide around the bridle cheek pieces. Attaching the reins to the rein hooks allow the rider to lift the cheek and use the Independent Side Movement™ of the mouthpiece. Using the hooks does not add leverage but allows the rider to transition from a direct rein action to indirect action without changing the bit. Adding a curb strap (using a Myler curb strap kit) incorporates curb pressure. Curb pressure is recommended for ported mouthpieces.
Size: 3 ¾" standard dee ring on 5" mouthpiece
Action: Direct rein action when reins are not attached through rein hook. Indirect rein action when rein is fixed on rein hook.
Discipline: Primarily English
Degree of Leverage: Little to no leverage when the hooks are used
5"
Myler Dee Ring Bit MB43LP
$260.99 $290.00
Myler Stainless Steel 3 3/4" Dee, MB 43LP Narrow Low Ported Barrel, Level 2-3
The MB 43LP does not rotate on to the tongue, but instead sits solidly across the bars and lips of the horse’s mouth. The port is narrower than a Level 3 mouthpiece, but still offers room for the horse’s tongue to pass under the bit. Because the port is narrow, when the reins are engaged, the horse will feel a slight pressure on the outside edges of the tongue — a gentle reminder rather than a strong reprimand. The port on this mouthpiece is only 1 ¼" high, so it will apply little to no palate pressure. It is the mildest of the Level 2-3 mouthpieces in terms of tongue pressure, just one step below a Level 3 mouthpiece.
Independent Side Movement
Stainless Steel mouthpiece
Curved Mouthpiece does not pinch lips and bars
Copper Inlay
Notes: For more tongue pressure, see the MB 27LP or MB 27PB. For the correctional version of this mouthpiece, see the MB 41PB. For more tongue relief and Level 3 version of this bit, see the MB 33.
The dee without hooks is a traditional "D" shaped cheek with fixed attachment of the mouthpiece. This style keeps the mouthpiece from draping on the tongue, providing a more direct signal than the loose ring. The straight side of the dee will not pull through the mouth and does not pinch.
Size: 3 ¾" Dee
Action: Direct
Notes: For a more versatile version of the cheek piece, see the English dee with hooks or the eggbutt with hooks.
5"
Myler Dee Ring Bit MB03T
$260.99 $290.00
Myler Stainless Steel Dee without Hooks, MB 03T Twisted Comfort Snaffle with Copper Roller, Level 1
The MB 03T is a Myler twist version of the traditional French link or lozenge mouthpiece commonly used in snaffle bits with an added copper roller. The MB 03T rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™. The MB 03T twist has no pronounced sharp edges, and the twist is a mirror on each side of the center barrel to provide a balanced feel for horse and rider.
Independent Side Movement
Stainless steel mouthpiece
Curved Mouthpiece
NO Copper Inlay
NOT dressage legal
Notes: The MB 03T is similar to the MB 02 except for a copper roller on the center barrel which can comfort horses that are restless or nervous. For more tongue relief, step up to the MB 04.
The dee without hooks is a traditional "D" shaped cheek with fixed attachment of the mouthpiece. This style keeps the mouthpiece from draping on the tongue, providing a more direct signal than the loose ring. The straight side of the dee will not pull through the mouth and does not pinch.
Size: 3 ¾" standard dee ring on 5" mouthpiece
Action: Direct
Notes: For a more versatile version of the cheek piece, see the English dee with hooks or the eggbutt with hooks.
Myler Dee Ring Bit MB10
$191.99 $213.00
Myler Stainless Steel 3 3/4" Dee without Hooks, MB 10 French Link Snaffle, Level 1
The MB 10 is a more comfortable Myler version of the traditional French link mouthpiece. It has a smaller link with a flatter contour which allows the tongue more freedom in the mouth and minimizes interference with the palate. Although it lacks the benefits of a “true” Myler mouthpiece, it has a distinctive curve so the bars of the bit wrap around the horse’s bar and lips which make the bit more comfortable.
NO Independent Side Movement
Stainless Steel Mouthpiece
Curved Mouthpiece
Copper Inlay
USEF, FEI, and USEA Dressage Legal 2019. Consult rulebook for more information.
Notes: The MB 10 disperses pressure over the tongue similarly to the MB 02, but does not offer the Independent Side Movement™ of a true Myler mouthpiece. Popular with riders who are more comfortable with a traditional design, but we recommend that you try the MB 01, 02, or 03 to get the full benefit of Myler features. For more tongue relief, step up to the MB 04.
The dee without hooks is a traditional "D" shaped cheek with fixed attachment of the mouthpiece. This style keeps the mouthpiece from draping on the tongue, providing a more direct signal than the loose ring. The straight side of the dee will not pull through the mouth and does not pinch.
Size: 3 ¾" dee
Action: Direct
Notes: For a more versatile version of the cheek piece, see the English dee with hooks or the eggbutt with hooks.
5"
Sprenger Stainless Steel Double Jointed Dee Ring ...
$89.99 $116.00
Lies steady in the horse's mouth, gentle on the corners of the mouth
Allows direct pressure transmission on the tongue and lower jaw due to the fixed mouthpiece
The lateral contact helps horses that tend to fall out whilst riding or approaching an obstacle
Thickness: 16 mm
Ring-Ø: 80 mm
Sprenger MAX-Control D-Ring Bit - 16 mm
$119.99 $153.00
Double jointed training or correction bit
Locks at a certain angle and operates like a straight bar
The locking mechanism takes effect when the horse gets strong or opposes the rider's hand
Unlocks immediately when the contact gets softer
Allows direct pressure transmission on the tongue and lower jaw due to the fixed mouthpiece
The lateral contact helps horses that tend to fall out whilst riding or approaching an obstacle
Thickness: 16 mm
Ring-Ø: 80 mm
Happy Mouth King Dee Bit With French Link
$119.99
Shaped like a D, the King Dee’s flat side provides slight lateral guiding while also helping to prevent the bit from being pulled through the horse’s mouth. King Dee's are most popular in the hunter ring but can be seen in racing, eventing, or dressage. The center of the mouthpiece features a French link mouthpiece that sits in the centre, joining the two halves of the bit together and applies mild pressure to the horse’s tongue when required. Happy Mouth bits offer a unique apple scent that encourages horses to accept the bit and the space age polymer mouthpiece offers an alternative to a metal bit.
King dee rings
Double jointed mouthpiece with French link
Apple scent to encourage the horse to accept the bit
Gentle space age polymer mouthpiece