All products -- Bits
Myler Full Cheek Bit w/ Hooks MB03
$296.99 $330.00
Myler Stainless Steel Full Cheek with Hooks, MB 03 Comfort Snaffle with Copper Roller, Level 1
The MB 03 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits with an added copper roller. The MB 03 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™.
Independent Side Movement
Stainless Steel Mouthpiece
Curved Mouthpiece
Copper Inlay
NOT Dressage Legal
Notes: The MB 03 is identical to the MB 02 except for a copper roller on the center barrel which can comfort horses that are restless or nervous. For more tongue relief, step up to the MB 04.
The full cheek with hooks is a traditional cheek style designed to be used with bit keepers (sold separately) to hold the bit in correct position. The posts also prevent the bit from sliding through the mouth while applying cheek pressure. When used without bit keepers, bit will sit in the mouth similarly to a dee or eggbutt without hooks. The ring has fixed attachment of the mouthpiece, as well as one rein slots (“hooks”) at the bottom of the ring for rein attachment. No attachment for curb chain or strap. TThe rein slot will fit standard ⅝" bridle leather.
The hook makes this a much more versatile bit than one without the hook. Using bit keepers to hold the post in the correct position stabilizes the bit in the bridle instead of allowing it to flop forward. Attaching the reins to the rein hooks allow the rider to lift the cheek and use the Independent Side Movement™ of the mouthpiece. Using the rein hooks does not add leverage but allows the rider to transition from a direct rein action to indirect action without changing the bit.
Action: Direct rein action when reins are not attached through rein hook. Indirect rein action when rein is fixed on rein hook.
Size: Rounded 2 ¼" ring, 6" overall height
Discipline: Primarily English with bit keepers. Commonly used in Western without bit keepers.
Degree of Leverage: Little to no leverage when the hooks are used
5"
Myler Loose Ring Bit w/ Twist MB09T
$162.99 $181.00
Myler Stainless Steel Loose Ring, MB 09T Twisted Single Joint, Level 1
The MB 09T twist has no pronounced sharp edges, and the twist is a mirror on each side of the center barrel to provide a balanced feel for horse and rider. It is a more comfortable Myler version of the traditional twisted single-jointed mouthpiece. Although it lacks the benefits of a “true” Myler mouthpiece, it has a distinctive curve so the bars of the bit wrap around the horse’s bar and lips which make the bit more comfortable. Sweet iron mouthpiece oxidizes and encourages salivation.
NO Independent Side Movement
Sweet Iron Mouthpiece
Curved Mouthpiece
NO Copper Inlay
Notes: Popular with riders who are more comfortable with a traditional design, but we recommend that you try the 01, 02, or 03 to get the full benefit of Myler features at the same Level.
The loose ring is a simple stainless steel "O" shape where both the bridle and mouthpiece have no fixed point of attachment but slide freely around the ring. The loose ring allows a lot of play as the mouthpiece slides freely around the ring.
Size: 3" ring
Action: Direct
Discipline: English or Western
Notes: The loose ring is generally considered one of the most non-interfering cheek pieces because the mouthpiece slides freely around the ring. However the play in the mouthpiece can make it difficult for a horse to find your hands as the mouthpiece is in continual motion. The movement of the mouthpiece can also exaggerate or create a busy mouth in young or anxious horses. It is best suited for more advanced horses fully schooled in leg and seat aids as well as rein aids.
5"
Cavalier Rubber Loose Ring Snaffle
$49.99
Soft rubber mouth loose ring with 22 mm mouth and 2-1/2” rings.
Cavalier Medium Weight Hollow Mouth Loose Ring
$44.99
Medium weight hollow mouth loose ring snaffle with 18mm mouth and 75mm rings.
Cavalier Soft Rubber Full Cheek
$64.99
Soft rubber mouth Full Cheek with 23 mm mouthpiece.
Please note: Rubber mouth bits are warrantied against manufacturer’s defects only. Wear and tear caused by routine usage is not covered.
Myler Dee Ring Bit w/ Hooks MB09T
$238.99 $265.00
*You are seeing a brand new design for this cheekpiece. Please be aware that some retailers may not have this style in stock yet so you may receive the original design.
Myler Stainless Steel 3 3/4" Dee with Hooks, MB 09T Twisted Single Joint, Level 1
The MB 09T twist has no pronounced sharp edges, and the twist is a mirror on each side of the center barrel to provide a balanced feel for horse and rider. It is a more comfortable Myler version of the traditional single-jointed mouthpiece. Although it lacks the benefits of a “true” Myler mouthpiece, it has a distinctive curve so the bars of the bit wrap around the horse’s bar and lips which make the bit more comfortable.
NO Independent Side Movement
Stainless Steel Mouthpiece
Curved Mouthpiece
NO Copper Inlay
Notes: Popular with riders who are more comfortable with a traditional design, but we recommend that you try the 01, 02, or 03 to get the full benefit of Myler features at the same Level.
The dee with hooks is a stainless steel "D" shaped ring with fixed attachment of the mouthpiece, as well as slots (“hooks”) at the top and bottom of the ring for bridle and rein attachment. The small loop behind the top slot accommodates a curb strap (attach with two curb hooks). Both the top bridle slot and bottom rein slot on the standard and medium dee will fit standard ⅝" bridle leather. The slots on the pony dee will fit ¾" bridle leather.
The hooks make this a much more versatile version of the dee without hooks. Attaching the headstall to the top hook holds the bit in the correct position instead of allowing it to slide around the bridle cheek pieces. Attaching the reins to the rein hooks allow the rider to lift the cheek and use the Independent Side Movement™ of the mouthpiece. Using the hooks does not add leverage but allows the rider to transition from a direct rein action to indirect action without changing the bit. Adding a curb strap (using a Myler curb strap kit) incorporates curb pressure. Curb pressure is recommended for ported mouthpieces.
Action: Direct rein action when reins are not attached through rein hook. Indirect rein action when rein is fixed on rein hook.
Size: 3 3/4" dee
Discipline: Primarily English
Degree of Leverage: Little to no leverage when the hooks are used
5"
Myler Dee Ring Bit w/ Hooks MB43LP
$265.99 $295.00
Myler Stainless Steel 3 3/4" Dee with Hooks, MB 43LP Narrow Low Ported Barrel, Level 2-3
The MB 43LP does not rotate on to the tongue, but instead sits solidly across the bars and lips of the horse’s mouth. The port is narrower than a Level 3 mouthpiece, but still offers room for the horse’s tongue to pass under the bit. Because the port is narrow, when the reins are engaged, the horse will feel a slight pressure on the outside edges of the tongue — a gentle reminder rather than a strong reprimand. The port on this mouthpiece is only 1 ¼" high, so it will apply little to no palate pressure. It is the mildest of the Level 2-3 mouthpieces in terms of tongue pressure, just one step below a Level 3 mouthpiece.
Independent Side Movement
Stainless Steel mouthpiece
Curved Mouthpiece does not pinch lips and bars
Copper Inlay
Notes: For more tongue pressure, see the MB 27LP or MB 27PB. For more tongue relief, see the MB 43MP. For the same benefits but with some palate pressure, see the MB 43HP. For the correctional version of this mouthpiece, see the MB 41PB. For more tongue relief and the Level 3 version of this bit, see the MB 33.
The Dee with Hooks is a stainless steel "D" shaped ring with fixed attachment of the mouthpiece, as well as slots (“hooks”) at the top and bottom of the ring for bridle and rein attachment. The small loop behind the top slot accommodates a curb strap (attach with two curb hooks). Both the top bridle slot and bottom rein slot on the standard and medium dee will fit standard ⅝" bridle leather. The slots on the pony dee will fit ¾" bridle leather.
The hooks make this a much more versatile version of the dee without hooks. Attaching the headstall to the top hook holds the bit in the correct position instead of allowing it to slide around the bridle cheek pieces. Attaching the reins to the rein hooks allow the rider to lift the cheek and use the Independent Side Movement™ of the mouthpiece. Using the hooks does not add leverage but allows the rider to transition from a direct rein action to indirect action without changing the bit. Adding a curb strap (using a Myler curb strap kit) incorporates curb pressure. Curb pressure is recommended for ported mouthpieces.
Action: Direct rein action when reins are not attached through rein hook. Indirect rein action when rein is fixed on rein hook.
Size: 3 3/4" Dee
Discipline: Primarily English
Degree of Leverage: Little to no leverage when the hooks are used
5"
Myler Dee Ring Bit MB32-3
$296.99 $330.00
Myler Stainless Steel 3 3/4" Dee without Hooks, MB 32-3 Mullen Triple Barrel, Level 2
The MB 32-3 is an innovative Myler alternative to the traditional mullen. It has three barrels which turn the mouthpiece from the typical solid bar of a mullen into a flexible bar which allows the horse to elevate his tongue and swallow more easily. When the reins are engaged, the mouthpiece becomes a solid bar like a traditional mullen, but with an exaggerated curve. This curved bar rotates across the bars and lips down on to the tongue, applying pressure across the entire surface of the tongue. The flexibility of the MB 32-3 makes it very forgiving and comforting when relaxed, but offers the rider control when engaged.
Independent Side Movement
Stainless Steel Mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
NOT Dressage legal
Notes: Because the tongue pressure applied by the MB 32-3 is evenly distributed across the entire tongue, this mouthpiece is considered "stronger" than the MB 04. However, its flexibility makes it a forgiving mouthpiece that works well for horses who have suffered mouth trauma or damage, or horses that tend to go behind the bit. For a ported mullen style offering more tongue relief, see the MB 06 or MB 36.
The dee without hooks is a traditional "D" shaped cheek with fixed attachment of the mouthpiece. This style keeps the mouthpiece from draping on the tongue, providing a more direct signal than the loose ring. The straight side of the dee will not pull through the mouth and does not pinch.
Size: 3 ¾" dee
Action: Direct
Notes: For a more versatile version of the cheek piece, see the English dee with hooks or the eggbutt with hooks.
5"
Cavalier Rubber Eggbutt Snaffle Bit
$59.99
Soft rubber mouth Eggbutt.
Please note: Rubber mouth bits are warrantied against manufacturer’s defects only. Wear and tear caused by routine usage is not covered.
Happy Mouth French Link Off-Set Dee Bit
$114.99
Featuring an enticing apple scented mouth piece, horse and ponies alike are guaranteed to love them. All Happy Mouth bits are made with the same high tech materials, making them soft, gentle and comfortable for your horse.
Myler Dee Ring Bit MB09T
$209.99
Myler Stainless Steel 3 3/4" Dee without Hooks, MB 09T Cyprium Twisted Single Joint, Level 1
The MB 09T twist has no pronounced sharp edges, and the twist is a mirror on each side of the center barrel to provide a balanced feel for horse and rider. It is a more comfortable Myler version of the traditional single-jointed mouthpiece. Although it lacks the benefits of a “true” Myler mouthpiece, it has a distinctive curve so the bars of the bit wrap around the horse’s bar and lips which make the bit more comfortable. Cyprium is a nickel-free copper alloy suitable for horses with a sensitivity to nickel.
NO Independent Side Movement
Cyprium Mouthpiece
Curved Mouthpiece
NO Copper Inlay
Notes: Popular with riders who are more comfortable with a traditional design, but we recommend that you try the 01, 02, or 03 to get the full benefit of Myler features at the same Level.
The dee without hooks is a traditional "D" shaped cheek with fixed attachment of the mouthpiece. This style keeps the mouthpiece from draping on the tongue, providing a more direct signal than the loose ring. The straight side of the dee will not pull through the mouth and does not pinch.
Size: 3 ¾" dee
Action: Direct
Notes: For a more versatile version of the cheek piece, see the English dee with hooks or the eggbutt with hooks.
5"
