All products -- Bits
Myler Dee Ring Bit MB03
$238.99 $266.00
Myler Stainless Steel Dee without Hooks, MB 03 Comfort Snaffle with Copper Roller, Level 1
The MB 03 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits with an added copper roller. The MB 03 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™.
Independent Side Movement
Stainless steel mouthpiece
Curved Mouthpiece
Copper Inlay
NOT dressage legal
Notes: The MB 03 is identical to the MB 02 except for a copper roller on the center barrel which can comfort horses that are restless or nervous. For more tongue relief, step up to the MB 04.
The dee without hooks is a traditional "D" shaped cheek with fixed attachment of the mouthpiece. This style keeps the mouthpiece from draping on the tongue, providing a more direct signal than the loose ring. The straight side of the dee will not pull through the mouth and does not pinch.
Size: 3 ¾" standard dee ring on 5" mouthpiece
Action: Direct
Notes: For a more versatile version of the cheek piece, see the English dee with hooks or the eggbutt with hooks.
Myler Dee Ring Bit w/ Hooks MB33
$254.99 $284.00
5" and 5 1/2" sizes: You are seeing a brand new design for this cheekpiece. Please be aware that some retailers may not have this style in stock yet so you may receive the original design.
Myler Stainless Steel Dee with Hooks, MB 33 Medium Wide Ported Barrel, Level 3
The MB 33 is the mildest Myler mouthpiece in terms of tongue pressure. The generously wide port allows room for the tongue to pass almost completely under the bit. Because this mouthpiece does not rotate on to the tongue and the port is wide, it applies little to no tongue pressure, working primarily off the lips and bars. The port on this mouthpiece is only 1 ½" high, so it will apply little to no palate pressure. Because the MB 33 offers such a high degree of tongue relief, the horse that goes well in this mouthpiece has a trustworthy and consistent disposition, and is trained to work off the leg and seat as well as the hands.
Independent Side Movement
Stainless Steel Mouthpiece
Curved Mouthpiece
Copper Inlay
NOT Dressage Legal
Notes: For a slight increase in tongue pressure, see the MB 43LP or MB 43MP. For same tongue relief without Independent Side Movement, see the MB 16 (Western only). For the same tongue relief and Independent Side Movement, but with a slight degree of collapse, see the MB 05. For more generous tongue relief, see the MB 16PB.
The hooks make this a much more versatile version of the dee without hooks. Attaching the headstall to the top hook holds the bit in the correct position instead of allowing it to slide around the bridle cheek pieces. Attaching the reins to the rein hooks allow the rider to lift the cheek and use the Independent Side Movement™ of the mouthpiece. Using the hooks does not add leverage but allows the rider to transition from a direct rein action to indirect action without changing the bit. Adding a curb strap (using a Myler curb strap kit) incorporates curb pressure. Curb pressure is recommended for ported mouthpieces.
Size: 3 3/4" dee on 5" and 5 1/2" mouthpiece, 3" dee on 4 1/2" mouthpiece
Action: Direct rein action when reins are not attached through rein hook. Indirect rein action when rein is fixed on rein hook.
Discipline: Primarily English
Degree of Leverage: Little to no leverage when the hooks are used
4.5" 5", 5.5"
Myler MBL Short Shank MB04
$310.99 $345.00
Myler Stainless Steel MBL Short Shank, MB 04 Low Port Comfort Snaffle, Level 2
The MB 04 is similar to the MB 02 in that it will rotate on the tongue and apply tongue pressure, however, it has a small (¼") port that introduces some tongue relief to the horse. The port allows the horse to swallow and move his tongue when he is moving forward and relaxed, which acts as a release or reward. The mouthpiece is curved, and it wraps around the bars and lips instead of pinching. Sweet iron mouthpiece oxidizes and encourages salivation.
Independent Side Movement
Sweet Iron Mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
Notes: The MB 04 provides an excellent transition from Level One to Level Two. It is suitable for a wide range of horses including green horses, experienced horses entering the Myler System, horses that have been ridden exclusively in a single-jointed mouthpiece, or horses that have not been ridden for a while needing re-schooling.
The MBL Shank is a length of flat stainless steel curved slightly back towards the horse, with a teardrop purchase and a rein ring. The mouthpiece attaches loosely to the cheek with a small decorative stack that allows ⅛" of slide, just enough to allow more tongue relief. The purchase is angled slightly away from the cheek to avoid rubbing. The MBT has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other.
The MBL is an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The MBL uses the combination of fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Recommended for use with ported mouthpieces.
Myler Eggbutt Bit w/ Hooks MB33
$239.99
*You are seeing a brand new design for this cheekpiece. Please be aware that some retailers may not have this style in stock yet so you may receive the original design.
Myler Stainless Steel Eggbutt with Hooks, MB 33 Medium Wide Ported Barrel, Level 3
The MB 33 is the mildest Myler mouthpiece in terms of tongue pressure. The generously wide port allows room for the tongue to pass almost completely under the bit. Because this mouthpiece does not rotate on to the tongue and the port is wide, it applies little to no tongue pressure, working primarily off the lips and bars. The port on this mouthpiece is only 1 ½" high, so it will apply little to no palate pressure. Because the MB 33 offers such a high degree of tongue relief, the horse that goes well in this mouthpiece has a trustworthy and consistent disposition, and is trained to work off the leg and seat as well as the hands.
Independent Side Movement
Stainless Steel Mouthpiece
Curved Mouthpiece
Copper Inlay
NOT Dressage Legal
Notes: For a slight increase in tongue pressure, see the MB 43LP or MB 43MP. For same tongue relief without Independent Side Movement, see the MB 16 (Western only). For the same tongue relief and Independent Side Movement, but with a slight degree of collapse, see the MB 05. For more generous tongue relief, see the MB 16PB.
The addition of the hooks to the cheek make this a more versatile version of the eggbutt without hooks. Attaching the headstall to the top hook holds the bit in the correct position instead of allowing it to slide around the bridle cheeks. Attaching the reins to the rein hooks allows the rider to lift the cheek and use the Independent Side Movement™ of the mouthpiece (if available). Using the hooks does not add leverage but allows the rider to transition from a direct rein action to indirect action without changing the bit. Adding a curb strap (using a Myler curb strap kit) incorporates curb pressure. Curb pressure is recommended for ported mouthpieces.
The small loop behind the top slot accommodates a curb strap (attach with two curb hooks). Both the top bridle slot and bottom rein slot will fit standard ⅝" bridle leather.
Size: 3 ½" rounded ring
Action: Direct rein action when rein hook is not used. Indirect rein action when rein is fixed on rein hook.
Discipline: English or Western
Degree of Leverage: Little to no leverage when the hooks are used.
5", 5.5"
6" Available by Special Order
Happy Mouth Two Ring Elevator
$99.99
Featuring a great apple scented mouth piece, horse and ponies alike are guaranteed to love them. All Happy Mouth bits are made with the same high tech plastics, making them soft, gentle and comfortable for your horse.
FEATURES:
Happy Mouth scented mouth piece
Single Jointed Snaffle
Double Ring Elevator
Sizes: 5" or 5-1/2”
Happy Mouth Bits, Elevator Bits
Myler Dee Ring Bit w/ Hooks MB32-3
$274.99 $305.00
Myler Stainless Steel 3 3/4" Dee with Hooks, MB 32-3 Triple Barrel, Level 2
The MB 32-3 is an innovative Myler alternative to the traditional mullen. It has three barrels which turn the mouthpiece from the typical solid bar of a mullen into a flexible bar which allows the horse to elevate his tongue and swallow more easily. When the reins are engaged, the mouthpiece becomes a solid bar like a traditional mullen, but with an exaggerated curve. This curved bar rotates across the bars and lips down on to the tongue, applying pressure across the entire surface of the tongue. The flexibility of the MB 32-3 makes it very forgiving and comforting when relaxed, but offers the rider control when engaged.
Independent Side Movement
Stainless Steel Mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
NOT Dressage legal
Notes: Because the tongue pressure applied by the MB 32-3 is evenly distributed across the entire tongue, this mouthpiece is considered "stronger" than the MB 04. However, its flexibility makes it a forgiving mouthpiece that works well for horses who have suffered mouth trauma or damage, or horses that tend to go behind the bit. For a ported mullen style offering more tongue relief, see the MB 06 or MB 36.
The dee with hooks is a stainless steel "D" shaped ring with fixed attachment of the mouthpiece, as well as slots (“hooks”) at the top and bottom of the ring for bridle and rein attachment. The small loop behind the top slot accommodates a curb strap (attach with two curb hooks). Both the top bridle slot and bottom rein slot on the standard and medium dee will fit standard ⅝" bridle leather. The slots on the pony dee will fit ¾" bridle leather.
The hooks make this a much more versatile version of the dee without hooks. Attaching the headstall to the top hook holds the bit in the correct position instead of allowing it to slide around the bridle cheek pieces. Attaching the reins to the rein hooks allow the rider to lift the cheek and use the Independent Side Movement™ of the mouthpiece. Using the hooks does not add leverage but allows the rider to transition from a direct rein action to indirect action without changing the bit. Adding a curb strap (using a Myler curb strap kit) incorporates curb pressure. Curb pressure is recommended for ported mouthpieces.
Size: 3 3/4" standard dee on 5" mouthpiece
Action: Direct rein action when reins are not attached through rein hook. Indirect rein action when rein is fixed on rein hook.
Discipline: Primarily English
Degree of Leverage: Little to no leverage when the hooks are used
Myler Dee Ring Bit w/ Hooks MB02
$269.99
5" and 5 1/2" sizes: You are seeing a brand new design for this cheekpiece. Please be aware that some retailers may not have this style in stock yet so you may receive the original design.
Myler Stainless Steel Dee with Hooks, MB 02 Comfort Snaffle Wide Barrel, Level 1
The MB 02 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits. The MB 02 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™.
Independent Side Movement™
Stainless Steel mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
NOT Dressage Legal
Notes: The mouthpiece is similar to the MB 02 but the center barrel of the MB 01 is narrower, which concentrates pressure on the center of the tongue more than the MB 02. For more tongue relief, step up to the MB 04.
The dee with hooks is a stainless steel "D" shaped ring with fixed attachment of the mouthpiece, as well as slots (“hooks”) at the top and bottom of the ring for bridle and rein attachment. The small loop behind the top slot accommodates a curb strap (attach with two curb hooks). Both the top bridle slot and bottom rein slot on the standard and medium dee will fit standard ⅝" bridle leather. The slots on the pony dee will fit ¾" bridle leather.
The hooks make this a much more versatile version of the dee without hooks. Attaching the headstall to the top hook holds the bit in the correct position instead of allowing it to slide around the bridle cheek pieces. Attaching the reins to the rein hooks allow the rider to lift the cheek and use the Independent Side Movement™ of the mouthpiece. Using the hooks does not add leverage but allows the rider to transition from a direct rein action to indirect action without changing the bit. Adding a curb strap (using a Myler curb strap kit) incorporates curb pressure. Curb pressure is recommended for ported mouthpieces.
Action: Direct rein action when reins are not attached through rein hook. Indirect rein action when rein is fixed on rein hook.
Size: 3 3/4" dee on 5" and 5 1/2" mouthpieces, 3" dee on 4 3/4" mouthpiece
Discipline: Primarily English
Degree of Leverage: Little to no leverage when the hooks are used
4.75", 5"
5.5" available by Special Order
Myler Dee Ring Bit MB33
$233.99 $260.00
Myler Stainless Steel Dee without Hooks, MB 33 Medium Wide Ported Barrel, Level 3
The MB 33 is the mildest Myler mouthpiece in terms of tongue pressure. The generously wide port allows room for the tongue to pass almost completely under the bit. Because this mouthpiece does not rotate on to the tongue and the port is wide, it applies little to no tongue pressure, working primarily off the lips and bars. The port on this mouthpiece is only 1 ½" high, so it will apply little to no palate pressure. Because the MB 33 offers such a high degree of tongue relief, the horse that goes well in this mouthpiece has a trustworthy and consistent disposition, and is trained to work off the leg and seat as well as the hands.
Independent Side Movement
Stainless Steel Mouthpiece
Curved Mouthpiece
Copper Inlay
NOT Dressage Legal - See MB 33WL mouthpiece.
Notes: For a slight increase in tongue pressure, see the MB 43LP or MB 43MP. For same tongue relief without Independent Side Movement, see the MB 16 (Western only). For the same tongue relief and Independent Side Movement, but with a slight degree of collapse, see the MB 05. For more generous tongue relief, see the MB 16PB.
The dee without hooks is a traditional "D" shaped cheek with fixed attachment of the mouthpiece. This style keeps the mouthpiece from draping on the tongue, providing a more direct signal than the loose ring. The straight side of the dee will not pull through the mouth and does not pinch.
Size: 3 ¾" dee ring on 5" mouthpiece, 3" pony dee ring on 4 ½" mouthpiece
Action: Direct
Notes: For a more versatile version of the cheek piece, see the English dee with hooks or the eggbutt with hooks.
4.5", 5"
Cavalier Rubber Mouth Dee-Ring Bit
$79.99
A Dee bit is a mild snaffle. Its “D” shaped rings help with lateral control of the head. Its effect is a little stronger than the Eggbutt bits.
FEATURES:
18mm Mouth
2.5" Dee Ring
Dee Ring
Happy Mouth French Link Loose Ring
$69.99
Happy Mouth Bits are Gentler for a Happier Horse. The Unique Apple Scent encourages horses to accept the bit and the space age polymer provides for a gentler bit for a happier horse. Due to the nature of their usage and material, Happy Mouth Bits are not covered by warranty, with the exception of manufacturer's defects.
Myler HBT Shank Western Bit MB33C
$229.99
Myler Stainless Steel 5" HBT Shank, MB 33 Cyprium Medium Wide Ported Barrel, Level 3
The MB 33 is the mildest Myler mouthpiece in terms of tongue pressure. The generously wide port allows room for the tongue to pass almost completely under the bit. Because this mouthpiece does not rotate on to the tongue and the port is wide, it applies little to no tongue pressure, working primarily off the lips and bars. The port on this mouthpiece is only 1 ½" high, so it will apply little to no palate pressure. Because the MB 33 offers such a high degree of tongue relief, the horse that goes well in this mouthpiece has a trustworthy and consistent disposition, and is trained to work off the leg and seat as well as the hands. Cyprium is a nickel-free copper alloy suitable for horses with a sensitivity to nickel.
Independent Side Movement
Cyprium Mouthpiece
Curved Mouthpiece
Copper Inlay
Notes: For a slight increase in tongue pressure, see the MB 43LP or MB 43MP. For same tongue relief without Independent Side Movement, see the MB 16 (Western only). For the same tongue relief and Independent Side Movement, but with a slight degree of collapse, see the MB 05. For more generous tongue relief, see the MB 16PB.
The 5" HBT shank is stainless steel and slightly curved back, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The HBT shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The HBT shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll.
Action: Indirect
Discipline: Western
Degree of Leverage: Mild
Notes: The HBT is well suited to trail riding as the shorter shank makes grazing easier for the horse.
5" or 5.5"