All products -- Western Myler Bits

sale
Myler Flat Shank Western Bit MB01 Myler Flat Shank Western Bit MB01

Myler Flat Shank Western Bit MB01

$278.99 $310.00
Myler Stainless Steel 5" HBT Shank, MB 01 Comfort Snaffle with Narrow Barrel, Level 1 The MB 01 is the Myler alternative to the traditional single-jointed mouthpiece commonly used in snaffle bits. The MB 01 rotates onto the tongue to apply concentrated tongue pressure at the center barrel, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional single-jointed mouthpiece. However, the barrel distributes the pressure more kindly and allows for each side of the bit to be used independently. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement™ Sweet Iron mouthpiece Curved mouthpiece does not pinch lips and bars Copper Inlay Notes: The mouthpiece is similar to the MB 02 but the center barrel of the MB 01 is narrower, which concentrates pressure on the center of the tongue more than the MB 02. For more tongue relief, step up to the MB 04. The 5" HBT shank is stainless steel and slightly curved back, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The HBT shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The HBT shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Mild Notes: The HBT is well suited to trail riding as the shorter shank makes grazing easier for the horse. 5"
sale
Myler Flat Shank Western Bit MB12 Myler Flat Shank Western Bit MB12

Myler Flat Shank Western Bit MB12

$229.99 $255.00
Myler Stainless Steel 7" Flat Shank, MB 12 Low Narrow Port, Level 3 The MB 12 is a solid Level 3 ported mouthpiece. Because the port is a little wider than the 43LP, the tongue pressure that the horse feels on the outside edges of the tongue is even milder than the 43LP. The port on this mouthpiece is 1 ¼", so it will apply little to no palate pressure. Suitable for a very finished horse that requires the occasional very mild reminder. It lacks Independent Side Movement™ so has a more solid feel and shows less rein movement than the MB 43LP or MB 33. Sweet iron mouthpiece oxidizes and encourages salivation. NO Independent Side Movement Curved mouthpiece Sweet Iron mouthpiece Copper Inlay Notes: For a wider port, see the MB 16. For similar tongue relief with Independent Side Movement, see the MB 43LP. The 7" Flat Shank is stainless steel and curved slightly back towards the horse, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The Flat Shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The flat shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Moderate 5"
sale
Myler C Sleeve Ring Western Bit MB02 Myler C Sleeve Ring Western Bit MB02

Myler C Sleeve Ring Western Bit MB02

$224.99 $249.00
Myler Stainless Steel "C" Sleeve Ring, MB 02 Comfort Snaffle Wide Barrel, Level 1 The MB 02 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits. The MB 02 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement™ Sweet Iron mouthpiece Curved mouthpiece does not pinch lips and bars Copper Inlay Notes: The mouthpiece is similar to the MB 02 but the center barrel of the MB 01 is narrower, which concentrates pressure on the center of the tongue more than the MB 02. For more tongue relief, step up to the MB 04. The loose ring is a simple stainless steel "O" shape where both the bridle and mouthpiece have no fixed point of attachment but slide freely around the ring. The loose ring allows a lot of play as the mouthpiece slides freely around the ring. The "C" Sleeve ensures that sensitive horses are not pinched by the moving ring, without having to use bit guards. Size: 3" ring Action: Direct Discipline: English or Western Notes: The loose ring is generally considered one of the most non-interfering cheek pieces because the mouthpiece slides freely around the ring. However the play in the mouthpiece can make it difficult for a horse to find your hands as the mouthpiece is in continual motion. The movement of the mouthpiece can also exaggerate or create a busy mouth in young or anxious horses. It is best suited for more advanced horses fully schooled in leg and seat aids as well as rein aids. 5"
sale
Myler Black Steel Western Dee MB09 Myler Black Steel Western Dee MB09

Myler Black Steel Western Dee MB09

$260.99 $290.00
Myler Black Steel Western Dee, MB 09 Single Joint Snaffle, Level 1 The MB 09 is a more comfortable Myler version of the traditional single-jointed mouthpiece. Although it lacks the benefits of a “true” Myler mouthpiece, it has a distinctive curve so the bars of the bit wrap around the horse’s bar and lips which make the bit more comfortable. Sweet iron mouthpiece oxidizes and encourages salivation. NO Independent Side Movement Sweet Iron Mouthpiece Curved Mouthpiece Black shank will discolor over time to an antique brown Stainless Steel Dots Copper Inlay Notes: Popular with riders who are more comfortable with a traditional design, but we recommend that you try the 01, 02, or 03 to get the full benefit of Myler features at the same Level. The Black Steel Western Dee without Hooks is a ring with fixed attachment of the mouthpiece. This traditional cheek style keeps the mouthpiece from draping on the tongue, providing a more direct signal than the loose ring. The straight side of ring will not pull through the mouth and does not pinch. Size: 3" offset ring Action: Direct Discipline: Primarily Western Notes: For a more versatile version, see the Western Dee with hooks. 5"
sale
Myler HBT Shank Western Bit MB02 Myler HBT Shank Western Bit MB02

Myler HBT Shank Western Bit MB02

$251.99 $280.00
Myler Stainless Steel 5" HBT Shank, MB 02 Comfort Snaffle Wide Barrel, Level 1 The MB 02 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits. The MB 02 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement™ Sweet Iron mouthpiece Curved mouthpiece does not pinch lips and bars Copper Inlay Notes: The mouthpiece is similar to the MB 02 but the center barrel of the MB 01 is narrower, which concentrates pressure on the center of the tongue more than the MB 02. For more tongue relief, step up to the MB 04. The 5" HBT shank is stainless steel and slightly curved back, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The HBT shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The HBT shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Mild Notes: The HBT is well suited to trail riding as the shorter shank makes grazing easier for the horse. 5" or 5.5"
Add to cart
sale
Myler HBT Shank Western Bit MB06 Myler HBT Shank Western Bit MB06

Myler HBT Shank Western Bit MB06

$251.99 $280.00
Myler Stainless Steel 5" HBT Shank, MB 06 Mullen with Low Ported Barrel, Level 2-3 The MB 06 is a Myler alternative to the traditional mullen, but it has a wide low port that allows the tongue to pass under it comfortably. The port is ¾" high, just enough to allow the horse’s tongue to elevate slightly and swallow, but not high enough for palate pressure. When the reins are engaged, the 06 applies pressure primarily to the bars and lips. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron Mouthpiece Curved mouthpiece does not pinch lips and bars Copper Inlay Notes: This mouthpiece is a step up in tongue relief from Level 2, but because the port is low, it does not offer as much tongue relief as other Level 2-3 mouthpieces with slightly higher ports because the tongue is still somewhat restricted. The MB 36 mouthpiece will offer more tongue relief than the MB 06 when the reins are relaxed, but more tongue pressure when the reins are engaged. For more overall tongue relief, see MB 43LP. The 5" HBT shank is stainless steel and slightly curved back, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The HBT shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The HBT shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Mild Notes: The HBT is well suited to trail riding as the shorter shank makes grazing easier for the horse. 5"
sale
Myler HBT Shank Western Bit MB05 Myler HBT Shank Western Bit MB05

Myler HBT Shank Western Bit MB05

$278.99 $310.00
Myler Stainless Steel 5" HBT Shank, MB 05 Low Medium Wide Ported Barrel, Level 3 The MB05 is one of the mildest Myler mouthpieces in terms of tongue pressure. The generously wide port allows room for the tongue to pass under the bit. However, unlike the solid MB 33, the MB 05 collapses slightly although it does not fully rotate on to the tongue like a Level 1 or Level 2 mouthpiece. This gives the mouthpiece more give and may apply some light tongue pressure although it works primarily off the lips and bars. The port on this mouthpiece is only 1 ¼" high, so it will apply little to no palate pressure. Because the MB 05 offers such a high degree of tongue relief, the horse that goes well in this mouthpiece has a trustworthy and consistent disposition, and is trained to work off the leg and seat as well as the hands. Independent Side Movement Curved mouthpiece Sweet Iron mouthpiece Copper Inlay Notes: For a slight increase in tongue pressure, see the MB 43LP. For similar tongue relief without Independent Side Movement, see the MB 12. For the same tongue relief and Independent Side Movement, but with no collapse, see the MB 33. For more tongue relief, see the MB 16PB. The 5" HBT shank is stainless steel and slightly curved back, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The HBT shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The HBT shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Mild Notes: The HBT is well suited to trail riding as the shorter shank makes grazing easier for the horse. 5"
sale
Myler Flat Shank Western Bit MB43LP Myler Flat Shank Western Bit MB43LP

Myler Flat Shank Western Bit MB43LP

$287.99 $320.00
Myler Stainless Steel 7" Flat Shank, MB 43LP Narrow Low Ported Barrel, Level 2-3 The MB 43LP does not rotate on to the tongue, but instead sits solidly across the bars and lips of the horse’s mouth. The port is narrower than a Level 3 mouthpiece, but still offers room for the horse’s tongue to pass under the bit. Because the port is narrow, when the reins are engaged, the horse will feel a slight pressure on the outside edges of the tongue — a gentle reminder rather than a strong reprimand. The port on this mouthpiece is only 1 ¼" high, so it will apply little to no palate pressure. It is the mildest of the Level 2-3 mouthpieces in terms of tongue pressure, just one step below a Level 3 mouthpiece. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron mouthpiece Curved Mouthpiece does not pinch lips and bars Copper Inlay Notes: For more tongue pressure, see the MB 27LP, MB 27PB or the MB 41PB. For more tongue relief, see the MB 43MP. For the same benefits but with some palate pressure, see the MB 43HP. For the correctional version of this mouthpiece, see the MB 47 or MB 47PB. For the Level 3 version of this mouthpiece but no Independent Side Movement, see the MB 12 or MB 98. The 7" Flat Shank is stainless steel and curved slightly back towards the horse, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The Flat Shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The flat shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Moderate 4.75", 5" 5.5" Available by Special Order
Add to cart
sale
Myler HBT Shank Western Bit MB04 Myler HBT Shank Western Bit MB04

Myler HBT Shank Western Bit MB04

$287.99 $320.00
Myler Stainless Steel 5" HBT Shank, MB 04 Low Port Comfort Snaffle, Level 2 The MB 04 is similar to the MB 02 in that it will rotate on the tongue and apply tongue pressure, however, it has a small (¼") port that introduces some tongue relief to the horse. The port allows the horse to swallow and move his tongue when he is moving forward and relaxed, which acts as a release or reward. The mouthpiece is curved, and it wraps around the bars and lips instead of pinching. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron Mouthpiece Curved mouthpiece does not pinch lips and bars Copper Inlay Notes: The MB 04 provides an excellent transition from Level One to Level Two. It is suitable for a wide range of horses including green horses, experienced horses entering the Myler System, horses that have been ridden exclusively in a single-jointed mouthpiece, or horses that have not been ridden for a while needing re-schooling. The 5" HBT shank is stainless steel and slightly curved back, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The HBT shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The HBT shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Mild Notes: The HBT is well suited to trail riding as the shorter shank makes grazing easier for the horse. 4.75", 5", 5.5"
Add to cart
Sold out sale
Myler Flat Shank Western Bit MB02 Myler Flat Shank Western Bit MB02

Myler Flat Shank Western Bit MB02

$279.99 $310.00
Myler Stainless Steel 7" Flat Shank, MB 02 Comfort Snaffle with Wide Barrel, Level 1 The MB 02 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits. The MB 02 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron mouthpiece Curved mouthpiece does not pinch lips and bars Copper Inlay Notes: Similar to the MB 01, but the center barrel of the MB 02 is wider which distributes pressure on the tongue over a larger surface. For more tongue relief, step up to the MB 04. For a horse with little or no training, consider the Combination Bit with MB 02 mouthpiece or the Combination Bit with MB 04 for more tongue relief. The 7" Flat Shank is stainless steel and curved slightly back towards the horse, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The Flat Shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The flat shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Moderate 4.75", 5", 5.5"
sale
Myler Flat Shank Western Bit MB27 Myler Flat Shank Western Bit MB27

Myler Flat Shank Western Bit MB27

$287.99 $320.00
Myler Stainless Steel 7" Flat Shank, MB 27 Traditional Correctional, Level 2-3 The MB 27 is a traditional correctional mouthpiece, which has a ported mouthpiece that collapses on to the outer lip and bars, and rotates on to the tongue. This mouthpiece has a 2" port and is identical to the MB 27PB HP, except that it does not have Independent Side Movement. Sweet iron mouthpiece oxidizes and encourages salivation. NO Independent Side Movement Sweet Iron Mouthpiece Curved Mouthpiece Copper Inlay Notes: For the same mouthpiece with a lower port, see the MB 27LP. For the same height port but with Independent Side Movement, see the MB 27PB HP. For the same mouthpiece with Independent Side Movement™ but a lower port, see the MB 27PB. The 7" Flat Shank is stainless steel and curved slightly back towards the horse, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The Flat Shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The flat shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Moderate 5"
sale
Myler Flat Shank Western Bit MB06 Myler Flat Shank Western Bit MB06

Myler Flat Shank Western Bit MB06

$278.99 $310.00
Myler Stainless Steel 7" Flat Shank, MB 06 Mullen with Low Ported Barrel, Level 2-3 The MB 06 is a Myler alternative to the traditional mullen, but it has a wide low port that allows the tongue to pass under it comfortably. The port is ¾" high, just enough to allow the horse’s tongue to elevate slightly and swallow, but not high enough for palate pressure. When the reins are engaged, the 06 applies pressure primarily to the bars and lips. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron Mouthpiece Curved mouthpiece does not pinch lips and bars Copper Inlay Notes: This mouthpiece is a step up in tongue relief from Level 2, but because the port is low, it does not offer as much tongue relief as other Level 2-3 mouthpieces with slightly higher ports because the tongue is still somewhat restricted. The MB 36 mouthpiece will offer more tongue relief than the MB 06 when the reins are relaxed, but more tongue pressure when the reins are engaged. For more overall tongue relief, see MB 43LP. The 7" Flat Shank is stainless steel and curved slightly back towards the horse, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The Flat Shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The flat shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Moderate 5"
sale
Myler Flat Shank Western Bit MB33 Myler Flat Shank Western Bit MB33

Myler Flat Shank Western Bit MB33

$299.99 $325.00
Myler Stainless Steel 7" Flat Shank, MB 33 Medium Wide Ported Barrel, Level 3 The MB 33 is the mildest Myler mouthpiece in terms of tongue pressure. The generously wide port allows room for the tongue to pass almost completely under the bit. Because this mouthpiece does not rotate on to the tongue and the port is wide, it applies little to no tongue pressure, working primarily off the lips and bars. The port on this mouthpiece is only 1 ½" high, so it will apply little to no palate pressure. Because the MB 33 offers such a high degree of tongue relief, the horse that goes well in this mouthpiece has a trustworthy and consistent disposition, and is trained to work off the leg and seat as well as the hands. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron Mouthpiece Curved Mouthpiece Copper Inlay Notes: For a slight increase in tongue pressure, see the MB 43LP or MB 43MP. For same tongue relief without Independent Side Movement, see the MB 16 (Western only). For the same tongue relief and Independent Side Movement, but with a slight degree of collapse, see the MB 05. For more generous tongue relief, see the MB 16PB. The 7" Flat Shank is stainless steel and curved slightly back towards the horse, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The Flat Shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The flat shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Moderate 5", 5.5" 4.75", 6" Available by Special Order
Add to cart
sale
Myler Black Steel Western Dee MB04 Myler Black Steel Western Dee MB04

Myler Black Steel Western Dee MB04

$290.99 $323.00
Myler Black Steel Western Dee, MB 04 Low Port Comfort Snaffle, Level 2 The MB 04 is similar to the MB 02 in that it will rotate on the tongue and apply tongue pressure, however, it has a small (¼") port that introduces some tongue relief to the horse. The port allows the horse to swallow and move his tongue when he is moving forward and relaxed, which acts as a release or reward. The mouthpiece is curved, and it wraps around the bars and lips instead of pinching. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement™ Sweet Iron mouthpiece Curved mouthpiece does not pinch lips and bars Copper Inlay Black dee will discolor over time to an antique brown Stainless steel dots Notes: The MB 04 provides an excellent transition from Level One to Level Two. It is suitable for a wide range of horses including green horses, experienced horses entering the Myler System, horses that have been ridden exclusively in a single-jointed mouthpiece, or horses that have not been ridden for a while needing re-schooling. The Black Steel Western Dee without Hooks is a ring with fixed attachment of the mouthpiece. This traditional cheek style keeps the mouthpiece from draping on the tongue, providing a more direct signal than the loose ring. The straight side of ring will not pull through the mouth and does not pinch. Size: 3" offset ring Action: Direct Discipline: Primarily Western Notes: For a more versatile version, see the Western Dee with hooks. 5"
sale
Myler Black Steel Seven Shank Bit MB02 Myler Black Steel Seven Shank Bit MB02

Myler Black Steel Seven Shank Bit MB02

$274.99 $305.00
Myler Black Steel 7" Seven Shank, MB 02 Comfort Snaffle Wide Barrel, Level 1 The MB 02 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits. The MB 02 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement™ Sweet Iron mouthpiece Curved mouthpiece does not pinch lips and bars Copper Inlay Black shank will discolor over time to an antique brown Stainless steel dots Notes: The mouthpiece is similar to the MB 02 but the center barrel of the MB 01 is narrower, which concentrates pressure on the center of the tongue more than the MB 02. For more tongue relief, step up to the MB 04. The Black Steel Seven Shank is a length of round black steel in a “7” curve, with a ring purchase and a rein ring. The mouthpiece is fixed to the cheek with a decorative “stack.” The entire shank moves independently of the mouthpiece. The purchase is slightly angled away from the cheek to avoid rubbing. Size: 6 ¾" shank Action: Indirect Discipline: Western Degree of Leverage: Mild to Moderate 5"
Sold out sale
Myler Black Steel Seven Shank Bit MB04 Myler Black Steel Seven Shank Bit MB04

Myler Black Steel Seven Shank Bit MB04

$274.99 $305.00
Myler Black Steel 7" Seven Shank, MB 04 Low Port Comfort Snaffle, Level 2 The MB 04 is similar to the MB 02 in that it will rotate on the tongue and apply tongue pressure, however, it has a small (¼") port that introduces some tongue relief to the horse. The port allows the horse to swallow and move his tongue when he is moving forward and relaxed, which acts as a release or reward. The mouthpiece is curved, and it wraps around the bars and lips instead of pinching. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement™ Sweet Iron mouthpiece Curved mouthpiece does not pinch lips and bars Copper Inlay Black shank will discolor over time to an antique brown Stainless steel dots Notes: The MB 04 provides an excellent transition from Level One to Level Two. It is suitable for a wide range of horses including green horses, experienced horses entering the Myler System, horses that have been ridden exclusively in a single-jointed mouthpiece, or horses that have not been ridden for a while needing re-schooling. The Black Steel Seven Shank is a length of round black steel in a “7” curve, with a ring purchase and a rein ring. The mouthpiece is fixed to the cheek with a decorative “stack.” The entire shank moves independently of the mouthpiece. The purchase is slightly angled away from the cheek to avoid rubbing. Size: 6 ¾" shank Action: Indirect Discipline: Western Degree of Leverage: Mild to Moderate 5"

© 2026 PICOV's Tack Shop | Site By VCC