All products -- Western Myler Bits

sale
Myler Embossed Western Shank Bit MB98 Myler Embossed Western Shank Bit MB98

Myler Embossed Western Shank Bit MB98

$296.99 $330.00
Myler Stainless Steel 7 1/2" Embossed Seven Shank, MB 98 Narrow Medium Port, Level 3 The MB 98 does not rotate on to the tongue, but instead sits solidly across the bars and lips of the horse’s mouth. The port is narrower than most Level 3 mouthpieces, but still offers ample room for the horse’s tongue to pass under the bit easily. Because the port is narrow, when the reins are engaged, the horse might feel a slight pressure on the outside edges of the tongue — a gentle reminder rather than a strong reprimand. The port on this mouthpiece is only 1 ⅝" high, so it will apply little to no palate pressure. Because the MB 98 does not have Independent Side Movement™, it has a more solid feel. NO Independent Side Movement Sweet Iron mouthpiece Copper Inlay Notes: For Independent Side Movement and similar tongue relief, see the 43MP. For more tongue relief with Independent Side Movement, see the 33 or 16PB. For more tongue relief and no Independent Side Movement, see the 16. The Embossed Seven Shank is an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. This shank uses the combination of fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. The cheek is embossed with a decorative floral pattern and concho. The mouthpiece attaches to the cheek with a square end that minimizes rein motion. The purchase is angled slightly away from the cheek to avoid rubbing. Size: 8" overall Action: Indirect Discipline: Western Degree of Leverage: Moderate
sale
Myler HBT Shank Western Bit MB03 Myler HBT Shank Western Bit MB03

Myler HBT Shank Western Bit MB03

$278.99 $310.00
Myler Stainless Steel 5" HBT Shank, MB 03 Comfort Snaffle with Copper Roller, Level 1 The MB 03 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits with an added copper roller. The MB 03 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron Mouthpiece Curved Mouthpiece Copper Inlay Notes: The MB 03 is identical to the MB 02 except for a copper roller on the center barrel which can comfort horses that are restless or nervous. For more tongue relief, step up to the MB 04. The 5" HBT shank is stainless steel and slightly curved back, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The HBT shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The HBT shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Mild Notes: The HBT is well suited to trail riding as the shorter shank makes grazing easier for the horse. 5"
sale
Myler Flat Shank Western Bit MB03 Myler Flat Shank Western Bit MB03

Myler Flat Shank Western Bit MB03

$292.99 $325.00
Myler Stainless Steel 7" Flat Shank, MB 03 Comfort Snaffle with Copper Roller, Level 1 The MB 03 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits with an added copper roller. The MB 03 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron Mouthpiece Curved Mouthpiece Copper Inlay Notes: The MB 03 is identical to the MB 02 except for a copper roller on the center barrel which can comfort horses that are restless or nervous. For more tongue relief, step up to the MB 04. The 7" Flat Shank is stainless steel and curved slightly back towards the horse, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The Flat Shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The flat shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Moderate 5"
sale
Myler Flat Shank Western Bit MB36 Myler Flat Shank Western Bit MB36

Myler Flat Shank Western Bit MB36

$287.99 $320.00
Myler Stainless Steel 7" Flat Shank, MB 36 Mullen Forward Tilt Low Ported Barrel, Level 2-3 The MB 36 is a Myler alternative to the traditional mullen, but it has a wide low port that allows the tongue to pass under it comfortably. The port is 1" high, and tilted forward at a 45º angle, allowing just enough room for the horse’s tongue to elevate slightly and swallow, but not high enough for palate pressure. When the reins are engaged, the MB 36 applies pressure primarily to the bars and lip, but also applies tongue pressure because of the forward tilt. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron mouthpiece Curved mouthpiece does not pinch lips or bars Copper Inlay Notes: This mouthpiece is a step up in tongue relief from Level 2, but because the port is low, it does not offer as much tongue relief as other Level 2-3 mouthpieces with slightly higher ports because the tongue is still somewhat restricted. The MB 36 mouthpiece is similar to the MB 06, except that it is ¼" higher and the port is tilted forward. The MB 06 mouthpiece will apply less tongue pressure than the MB 36 but additionally offer less tongue relief when the reins are relaxed. For more overall tongue relief and less tongue pressure, see the 43LP. The 7" Flat Shank is stainless steel and curved slightly back towards the horse, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The Flat Shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The flat shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Moderate 4.75", 5", 5.5" 6" Available by special order
Add to cart
sale
Myler Flat Shank Western Bit MB04 Myler Flat Shank Western Bit MB04

Myler Flat Shank Western Bit MB04

$278.99 $310.00
Myler Stainless Steel 7" Flat Shank, MB 04 Low Port Comfort Snaffle, Level 2 The MB 04 is similar to the MB 02 in that it will rotate on the tongue and apply tongue pressure, however, it has a small (¼") port that introduces some tongue relief to the horse. The port allows the horse to swallow and move his tongue when he is moving forward and relaxed, which acts as a release or reward. The mouthpiece is curved, and it wraps around the bars and lips instead of pinching. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron Mouthpiece Curved mouthpiece does not pinch lips and bars Copper Inlay Notes: The MB 04 provides an excellent transition from Level One to Level Two. It is suitable for a wide range of horses including green horses, experienced horses entering the Myler System, horses that have been ridden exclusively in a single-jointed mouthpiece, or horses that have not been ridden for a while needing re-schooling. The 7" Flat Shank is stainless steel and curved slightly back towards the horse, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The Flat Shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The flat shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Moderate 5", 5.5" 4.75" Available by Special Order
Add to cart
sale
Myler Black Steel Western Dee MB03 Myler Black Steel Western Dee MB03

Myler Black Steel Western Dee MB03

$307.99 $341.00
Myler Black Steel Western Dee, MB 03 Comfort Snaffle with Copper Roller, Level 1 The MB 03 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits with an added copper roller. The MB 03 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Curved Mouthpiece Sweet Iron Mouthpiece, Copper Inlay Black dee will discolor over time to antique brown Stainless steel dots Notes: The MB 03 is identical to the MB 02 except for a copper roller on the center barrel which can comfort horses that are restless or nervous. For more tongue relief, step up to the MB 04. The Black Steel Western Dee without Hooks is a ring with fixed attachment of the mouthpiece. This traditional cheek style keeps the mouthpiece from draping on the tongue, providing a more direct signal than the loose ring. The straight side of ring will not pull through the mouth and does not pinch. Size: 3" offset ring Action: Direct Discipline: Primarily Western Notes: For a more versatile version, see the Western Dee with hooks. 5"
sale
Myler Black Steel Seven Shank Bit MB43LP Myler Black Steel Seven Shank Bit MB43LP

Myler Black Steel Seven Shank Bit MB43LP

$287.99 $320.00
Myler Black Steel 7" Seven Shank, MB 43LP Narrow Low Ported Barrel, Level 2-3 The MB 43LP does not rotate on to the tongue, but instead sits solidly across the bars and lips of the horse’s mouth. The port is narrower than a Level 3 mouthpiece, but still offers room for the horse’s tongue to pass under the bit. Because the port is narrow, when the reins are engaged, the horse will feel a slight pressure on the outside edges of the tongue — a gentle reminder rather than a strong reprimand. The port on this mouthpiece is only 1 ¼" high, so it will apply little to no palate pressure. It is the mildest of the Level 2-3 mouthpieces in terms of tongue pressure, just one step below a Level 3 mouthpiece. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron mouthpiece Curved Mouthpiece does not pinch lips and bars Copper Inlay Black shank will discolor over time to an antique brown Stainless Steel Dots Notes: For more tongue pressure, see the MB 27LP, MB 27PB or the MB 41PB. For more tongue relief, see the MB 43MP. For the same benefits but with some palate pressure, see the MB 43HP. For the correctional version of this mouthpiece, see the MB 47 or MB 47PB. For the Level 3 version of this mouthpiece but no Independent Side Movement, see the MB 12 or MB 98. The Black Steel Seven Shank is a length of round black steel in a “7” curve, with a ring purchase and a rein ring. The mouthpiece is fixed to the cheek with a decorative “stack.” The entire shank moves independently of the mouthpiece. The purchase is slightly angled away from the cheek to avoid rubbing. Size: 6 ¾" shank Action: Indirect Discipline: Western Degree of Leverage: Mild to Moderate 5"
sale
Myler Black Steel Seven Shank Bit MB06 Myler Black Steel Seven Shank Bit MB06

Myler Black Steel Seven Shank Bit MB06

$274.99 $305.00
Myler Black Steel 7" Seven Shank, MB 06 Mullen with Low Ported Barrel, Level 2-3 The MB 06 is a Myler alternative to the traditional mullen, but it has a wide low port that allows the tongue to pass under it comfortably. The port is ¾" high, just enough to allow the horse’s tongue to elevate slightly and swallow, but not high enough for palate pressure. When the reins are engaged, the 06 applies pressure primarily to the bars and lips. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron Mouthpiece, Copper Inlay Curved mouthpiece does not pinch lips and bars Black shank will discolor over time to an antique brown Stainless Steel Dots Notes: This mouthpiece is a step up in tongue relief from Level 2, but because the port is low, it does not offer as much tongue relief as other Level 2-3 mouthpieces with slightly higher ports because the tongue is still somewhat restricted. The MB 36 mouthpiece will offer more tongue relief than the MB 06 when the reins are relaxed, but more tongue pressure when the reins are engaged. For more overall tongue relief, see MB 43LP. The Black Steel Seven Shank is a length of round black steel in a “7” curve, with a ring purchase and a rein ring. The mouthpiece is fixed to the cheek with a decorative “stack.” The entire shank moves independently of the mouthpiece. The purchase is slightly angled away from the cheek to avoid rubbing. Size: 6 ¾" shank Action: Indirect Discipline: Western Degree of Leverage: Mild to Moderate 5"
sale
Myler Black Steel Seven Shank Bit MB33 Myler Black Steel Seven Shank Bit MB33

Myler Black Steel Seven Shank Bit MB33

$279.99 $310.00
ON BACK ORDER UNTIL MAY 2026 Myler Black Steel 7" Seven Shank, MB 33 Medium Low Ported Barrel, Level 3 The MB 33 is the mildest Myler mouthpiece in terms of tongue pressure. The generously wide port allows room for the tongue to pass almost completely under the bit. Because this mouthpiece does not rotate on to the tongue and the port is wide, it applies little to no tongue pressure, working primarily off the lips and bars. The port on this mouthpiece is only 1 ½" high, so it will apply little to no palate pressure. Because the MB 33 offers such a high degree of tongue relief, the horse that goes well in this mouthpiece has a trustworthy and consistent disposition, and is trained to work off the leg and seat as well as the hands. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron Mouthpiece Curved Mouthpiece Black shank will discolor over time to an antique brown Stainless Steel Dots Copper Inlay Notes: For a slight increase in tongue pressure, see the MB 43LP or MB 43MP. For same tongue relief without Independent Side Movement, see the MB 16 (Western only). For the same tongue relief and Independent Side Movement, but with a slight degree of collapse, see the MB 05. For more generous tongue relief, see the MB 16PB. The Black Steel Seven Shank is a length of round black steel in a “7” curve, with a ring purchase and a rein ring. The mouthpiece is fixed to the cheek with a decorative “stack.” The entire shank moves independently of the mouthpiece. The purchase is slightly angled away from the cheek to avoid rubbing. Size: 6 ¾" shank Action: Indirect Discipline: Western Degree of Leverage: Mild to Moderate 5"
sale
Myler HBT Shank Western Bit MB36 Myler HBT Shank Western Bit MB36

Myler HBT Shank Western Bit MB36

$292.99 $325.00
Myler Stainless Steel 5" HBT Shank, MB 36 Mullen Forward Tilt Low Ported Barrel, Level 2-3 The MB 36 is a Myler alternative to the traditional mullen, but it has a wide low port that allows the tongue to pass under it comfortably. The port is 1" high, and tilted forward at a 45º angle, allowing just enough room for the horse’s tongue to elevate slightly and swallow, but not high enough for palate pressure. When the reins are engaged, the MB 36 applies pressure primarily to the bars and lip, but also applies tongue pressure because of the forward tilt. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron mouthpiece Curved mouthpiece does not pinch lips or bars Copper Inlay Notes: This mouthpiece is a step up in tongue relief from Level 2, but because the port is low, it does not offer as much tongue relief as other Level 2-3 mouthpieces with slightly higher ports because the tongue is still somewhat restricted. The MB 36 mouthpiece is similar to the MB 06, except that it is ¼" higher and the port is tilted forward. The MB 06 mouthpiece will apply less tongue pressure than the MB 36 but additionally offer less tongue relief when the reins are relaxed. For more overall tongue relief and less tongue pressure, see the 43LP. The 5" HBT shank is stainless steel and slightly curved back, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The HBT shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The HBT shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Mild Notes: The HBT is well suited to trail riding as the shorter shank makes grazing easier for the horse. 4.75", 5", 5.5"
Add to cart
Myler HBT Shank Western Bit MB03T Myler HBT Shank Western Bit MB03T

Myler HBT Shank Western Bit MB03T

$309.99
Myler Stainless Steel 5" HBT Shank, MB 03T Twisted Comfort Snaffle with Copper Roller, Level 1 The MB 03T is a Myler twist version of the traditional French link or lozenge mouthpiece commonly used in snaffle bits with an added copper roller. The MB 03T rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™. The MB 03T twist has no pronounced sharp edges, and the twist is a mirror on each side of the center barrel to provide a balanced feel for horse and rider. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron Mouthpiece Curved Mouthpiece NO Copper Inlay Notes: The MB 03T is similar to the MB 02 except for a copper roller on the center barrel which can comfort horses that are restless or nervous. For more tongue relief, step up to the MB 04. The 5" HBT shank is stainless steel and slightly curved back, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The HBT shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The HBT shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Mild Notes: The HBT is well suited to trail riding as the shorter shank makes grazing easier for the horse. 5" Available by Special Order
sale
Myler HBT Shank Western Bit MB47 Myler HBT Shank Western Bit MB47

Myler HBT Shank Western Bit MB47

$296.99 $330.00
Myler Stainless Steel 5" HBT Shank, MB 47 Traditional Correctional, Level 2-3 The MB 47 is a traditional correctional mouthpiece, which has a ported mouthpiece that collapses on to the outer lip and bars, and rotates on to the tongue. The MB 47 is identical to the MB 47PB but lacks Independent Side Movement. Sweet Iron mouthpiece oxidizes and encourages salivation. NO Independent Side Movement Sweet Iron mouthpiece Curved mouthpiece does not pinch lips or bars Copper Inlay Notes: This mouthpiece is the correctional version of the MB 43HP. For the same mouthpiece but with Independent Side Movement, see the MB 47PB. For the non-correctional version and little to no palate pressure, see the MB 43LP. For more concentrated tongue pressure and some palate pressure with Independent Side Movement™, see the MB 27PB HP. For less tongue pressure and some palate pressure with Independent Side Movement, see the MB 43HP. The 5" HBT shank is stainless steel and slightly curved back, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The HBT shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The HBT shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Mild Notes: The HBT is well suited to trail riding as the shorter shank makes grazing easier for the horse. 5"
sale
Myler Embossed Western Bit MB43MP Myler Embossed Western Bit MB43MP

Myler Embossed Western Bit MB43MP

$332.99 $370.00
Myler Stainless Steel 7 1/2" Embossed Seven Shank, MB 43MP Narrow Medium Ported Barrel, Level 2-3 The MB 43MP does not rotate on to the tongue, but instead sits solidly across the bars and lips of the horse’s mouth. The port is narrower than a Level 3 mouthpiece, but still offers room for the horse’s tongue to pass under the bit. Because the port is narrow, when the reins are engaged, the horse will feel a slight pressure on the outside edges of the tongue — a gentle reminder rather than a strong reprimand. The port on this mouthpiece is only 1 ½" high, so it will apply little to no palate pressure. The MB 43MP is the mildest of the Level Two-Three mouthpieces in terms of tongue pressure, just one step below a Level 3 mouthpiece. Sweet Iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron mouthpiece Curved Mouthpiece does not pinch lips and bars Copper Inlay Notes: For more tongue pressure, see the MB 27LP. For more tongue relief, see the MB 41PB. For slightly less tongue relief or a lower port, see the 43LP. For the same benefits but with some palate pressure, see the MB 43HP. For the correctional version of this mouthpiece, see the MB 47 and MB 47PB. For the Level 3 version of this mouthpiece without Independent Side Movement, see the MB 12 or MB 98. The Embossed Seven Shank is an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. This shank uses the combination of fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. The cheek is embossed with a decorative floral pattern and concho. The mouthpiece attaches to the cheek with a square end that minimizes rein motion. The purchase is angled slightly away from the cheek to avoid rubbing. Size: 8" overall Action: Indirect Discipline: Western Degree of Leverage: Moderate 5"
sale
Myler HBT Shank Western Bit MB47PB Myler HBT Shank Western Bit MB47PB

Myler HBT Shank Western Bit MB47PB

$305.99 $340.00
Myler Stainless Steel 5" HBT Shank, MB 47PB Correctional Ported Barrel, Level 2-3 The 47PB is a correctional mouthpiece, a ported mouthpiece that collapses on to the outer lip and bars, and rotates on to the tongue. The port is narrower than a Level 3 mouthpiece, but offers plenty of room for the horse’s tongue to pass under the bit. The angles of the port are rounded, so when the bit collapses and applies two points of pressure on the tongue, the pressure is mild. The port on this mouthpiece is 1 ⅞" high, so it will apply some palate pressure. Sweet Iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Sweet Iron mouthpiece Curved mouthpiece does not pinch lips or bars Copper Inlay Notes: A horse with a thicker tongue or lower palate will feel more palate pressure. This mouthpiece is the correctional version of the MB 43HP and is identical to the MB 47, but with the added benefit of Independent Side Movement. For increased tongue pressure and same palate pressure, see the MB 27PB or MB 27PB HP. For more tongue relief with same palate pressure, see the 43HP. For less tongue pressure and little to no palate pressure, see the MB 43LP or MB 43MP. For the same mouthpiece but without Independent Side Movement, see the MB 47. The 5" HBT shank is stainless steel and slightly curved back, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The HBT shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The HBT shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Mild Notes: The HBT is well suited to trail riding as the shorter shank makes grazing easier for the horse. 5"
sale
Myler Flat Shank Western Bit MB29 Myler Flat Shank Western Bit MB29

Myler Flat Shank Western Bit MB29

$332.99 $370.00
Myler Stainless Steel 7" Flat Shank, MB 29 Correctional Cathedral Port, Level 2-3 The MB 29 is a traditional correctional mouthpiece, which has a ported mouthpiece that collapses on to the outer lip and bars, and rotates on to the tongue. The port itself is 1 ½" high, offering room for the horse’s tongue to pass under the bit. The flat plate above the port is 1 ¼" high and ¾" wide and tilts back rather than sitting straight up. When the reins are engaged, the mouthpiece collapses and applies two points of pressure on the tongue while the flat plate tips forward and applies pressure to the palate. The pressure on the palate is distributed across the surface of the plate. Sweet Iron mouthpiece oxidizes and encourages salivation. NO Independent Side Movement Sweet Iron mouthpiece Curved Mouthpiece Copper Inlay Notes: The MB 29 is not designed for use by the casual rider. Its use requires a very experienced rider with excellent hand control and a horse that is very finished in his training who knows how to ride off seat and leg, as well as being very light on the rein aids. When palate pressure is applied properly, it causes the horse to drop his head but because the palate is so sensitive, that type of pressure needs to be used with great restraint. For the same tongue relief but with milder palate pressure, see the MB 27PB HP. For a solid version offering more tongue relief with palate pressure, see the MB 13C. The 7" Flat Shank is stainless steel and curved slightly back towards the horse, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The Flat Shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The flat shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Action: Indirect Discipline: Western Degree of Leverage: Moderate 5"
sale
Myler Black Steel Seven Shank Bit MB03 Myler Black Steel Seven Shank Bit MB03

Myler Black Steel Seven Shank Bit MB03

$296.99 $330.00
Myler Black Steel 7" Seven Shank, MB 03 Comfort Snaffle with Copper Roller, Level 1 The MB 03 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits with an added copper roller. The MB 03 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™. Sweet iron mouthpiece oxidizes and encourages salivation. Independent Side Movement Curved Mouthpiece Sweet Iron Mouthpiece, Copper Inlay Black shank will discolor over time to antique brown Stainless steel dots Notes: The MB 03 is identical to the MB 02 except for a copper roller on the center barrel which can comfort horses that are restless or nervous. For more tongue relief, step up to the MB 04. The Black Steel Seven Shank is a length of round black steel in a “7” curve, with a ring purchase and a rein ring. The mouthpiece is fixed to the cheek with a decorative “stack.” The entire shank moves independently of the mouthpiece. The purchase is slightly angled away from the cheek to avoid rubbing. Size: 6 ¾" shank Action: Indirect Discipline: Western Degree of Leverage: Mild to Moderate 5"

© 2026 PICOV's Tack Shop | Site By VCC