All products -- Western Myler Bits
Myler Flat Shank Western Bit MB04
$278.99 $310.00
Myler Stainless Steel 7" Flat Shank, MB 04 Low Port Comfort Snaffle, Level 2
The MB 04 is similar to the MB 02 in that it will rotate on the tongue and apply tongue pressure, however, it has a small (¼") port that introduces some tongue relief to the horse. The port allows the horse to swallow and move his tongue when he is moving forward and relaxed, which acts as a release or reward. The mouthpiece is curved, and it wraps around the bars and lips instead of pinching. Sweet iron mouthpiece oxidizes and encourages salivation.
Independent Side Movement
Sweet Iron Mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
Notes: The MB 04 provides an excellent transition from Level One to Level Two. It is suitable for a wide range of horses including green horses, experienced horses entering the Myler System, horses that have been ridden exclusively in a single-jointed mouthpiece, or horses that have not been ridden for a while needing re-schooling.
The 7" Flat Shank is stainless steel and curved slightly back towards the horse, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The Flat Shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The flat shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll.
Action: Indirect
Discipline: Western
Degree of Leverage: Moderate
5", 5.5"
4.75" Available by Special Order
Myler HBT Shank Western Bit MB06
$251.99 $280.00
Myler Stainless Steel 5" HBT Shank, MB 06 Mullen with Low Ported Barrel, Level 2-3
The MB 06 is a Myler alternative to the traditional mullen, but it has a wide low port that allows the tongue to pass under it comfortably. The port is ¾" high, just enough to allow the horse’s tongue to elevate slightly and swallow, but not high enough for palate pressure. When the reins are engaged, the 06 applies pressure primarily to the bars and lips. Sweet iron mouthpiece oxidizes and encourages salivation.
Independent Side Movement
Sweet Iron Mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
Notes: This mouthpiece is a step up in tongue relief from Level 2, but because the port is low, it does not offer as much tongue relief as other Level 2-3 mouthpieces with slightly higher ports because the tongue is still somewhat restricted. The MB 36 mouthpiece will offer more tongue relief than the MB 06 when the reins are relaxed, but more tongue pressure when the reins are engaged. For more overall tongue relief, see MB 43LP.
The 5" HBT shank is stainless steel and slightly curved back, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The HBT shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The HBT shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll.
Action: Indirect
Discipline: Western
Degree of Leverage: Mild
Notes: The HBT is well suited to trail riding as the shorter shank makes grazing easier for the horse.
5"
Myler C Sleeve Ring Western Bit MB02
$224.99 $249.00
Myler Stainless Steel "C" Sleeve Ring, MB 02 Comfort Snaffle Wide Barrel, Level 1
The MB 02 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits. The MB 02 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™. Sweet iron mouthpiece oxidizes and encourages salivation.
Independent Side Movement™
Sweet Iron mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
Notes: The mouthpiece is similar to the MB 02 but the center barrel of the MB 01 is narrower, which concentrates pressure on the center of the tongue more than the MB 02. For more tongue relief, step up to the MB 04.
The loose ring is a simple stainless steel "O" shape where both the bridle and mouthpiece have no fixed point of attachment but slide freely around the ring. The loose ring allows a lot of play as the mouthpiece slides freely around the ring. The "C" Sleeve ensures that sensitive horses are not pinched by the moving ring, without having to use bit guards.
Size: 3" ring
Action: Direct
Discipline: English or Western
Notes: The loose ring is generally considered one of the most non-interfering cheek pieces because the mouthpiece slides freely around the ring. However the play in the mouthpiece can make it difficult for a horse to find your hands as the mouthpiece is in continual motion. The movement of the mouthpiece can also exaggerate or create a busy mouth in young or anxious horses. It is best suited for more advanced horses fully schooled in leg and seat aids as well as rein aids.
5"
Myler Black Steel Seven Shank Bit MB06
$274.99 $305.00
Myler Black Steel 7" Seven Shank, MB 06 Mullen with Low Ported Barrel, Level 2-3
The MB 06 is a Myler alternative to the traditional mullen, but it has a wide low port that allows the tongue to pass under it comfortably. The port is ¾" high, just enough to allow the horse’s tongue to elevate slightly and swallow, but not high enough for palate pressure. When the reins are engaged, the 06 applies pressure primarily to the bars and lips. Sweet iron mouthpiece oxidizes and encourages salivation.
Independent Side Movement
Sweet Iron Mouthpiece, Copper Inlay
Curved mouthpiece does not pinch lips and bars
Black shank will discolor over time to an antique brown
Stainless Steel Dots
Notes: This mouthpiece is a step up in tongue relief from Level 2, but because the port is low, it does not offer as much tongue relief as other Level 2-3 mouthpieces with slightly higher ports because the tongue is still somewhat restricted. The MB 36 mouthpiece will offer more tongue relief than the MB 06 when the reins are relaxed, but more tongue pressure when the reins are engaged. For more overall tongue relief, see MB 43LP.
The Black Steel Seven Shank is a length of round black steel in a “7” curve, with a ring purchase and a rein ring. The mouthpiece is fixed to the cheek with a decorative “stack.” The entire shank moves independently of the mouthpiece. The purchase is slightly angled away from the cheek to avoid rubbing.
Size: 6 ¾" shank
Action: Indirect
Discipline: Western
Degree of Leverage: Mild to Moderate
5"
Myler Black Steel Western Dee MB03
$307.99 $341.00
Myler Black Steel Western Dee, MB 03 Comfort Snaffle with Copper Roller, Level 1
The MB 03 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits with an added copper roller. The MB 03 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™. Sweet iron mouthpiece oxidizes and encourages salivation.
Independent Side Movement
Curved Mouthpiece
Sweet Iron Mouthpiece, Copper Inlay
Black dee will discolor over time to antique brown
Stainless steel dots
Notes: The MB 03 is identical to the MB 02 except for a copper roller on the center barrel which can comfort horses that are restless or nervous. For more tongue relief, step up to the MB 04.
The Black Steel Western Dee without Hooks is a ring with fixed attachment of the mouthpiece. This traditional cheek style keeps the mouthpiece from draping on the tongue, providing a more direct signal than the loose ring. The straight side of ring will not pull through the mouth and does not pinch.
Size: 3" offset ring
Action: Direct
Discipline: Primarily Western
Notes: For a more versatile version, see the Western Dee with hooks.
5"
Myler Flat Shank Western Bit MB02
$279.99 $310.00
Myler Stainless Steel 7" Flat Shank, MB 02 Comfort Snaffle with Wide Barrel, Level 1
The MB 02 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits. The MB 02 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™. Sweet iron mouthpiece oxidizes and encourages salivation.
Independent Side Movement
Sweet Iron mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
Notes: Similar to the MB 01, but the center barrel of the MB 02 is wider which distributes pressure on the tongue over a larger surface. For more tongue relief, step up to the MB 04. For a horse with little or no training, consider the Combination Bit with MB 02 mouthpiece or the Combination Bit with MB 04 for more tongue relief.
The 7" Flat Shank is stainless steel and curved slightly back towards the horse, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The Flat Shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The flat shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll.
Action: Indirect
Discipline: Western
Degree of Leverage: Moderate
4.75", 5", 5.5"
Myler Flat Shank Western Bit MB01
$278.99 $310.00
Myler Stainless Steel 5" HBT Shank, MB 01 Comfort Snaffle with Narrow Barrel, Level 1
The MB 01 is the Myler alternative to the traditional single-jointed mouthpiece commonly used in snaffle bits. The MB 01 rotates onto the tongue to apply concentrated tongue pressure at the center barrel, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional single-jointed mouthpiece. However, the barrel distributes the pressure more kindly and allows for each side of the bit to be used independently. Sweet iron mouthpiece oxidizes and encourages salivation.
Independent Side Movement™
Sweet Iron mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
Notes: The mouthpiece is similar to the MB 02 but the center barrel of the MB 01 is narrower, which concentrates pressure on the center of the tongue more than the MB 02. For more tongue relief, step up to the MB 04.
The 5" HBT shank is stainless steel and slightly curved back, with a flat-top purchase and a rein ring. The mouthpiece has a fixed attachment. The HBT shank has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other. The purchase is slightly angled away from the cheek to avoid rubbing. It has an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The HBT shank uses the combination of the fixed cheek and fixed rein to apply pressure to the mouth, chin and poll.
Action: Indirect
Discipline: Western
Degree of Leverage: Mild
Notes: The HBT is well suited to trail riding as the shorter shank makes grazing easier for the horse.
5"
Myler Western Dee w/ Hooks MB32-3
$279.99 $310.00
*You are seeing a brand new design for this cheekpiece. Please be aware that some retailers may not have this style in stock yet so you may receive the original design.
Myler Stainless Steel Western Dee with Hooks, MB 32-3 Mullen Triple Barrel, Level 2
The MB 32-3 is an innovative Myler alternative to the traditional mullen. It has three barrels which turn the mouthpiece from the typical solid bar of a mullen into a flexible bar which allows the horse to elevate his tongue and swallow more easily. When the reins are engaged, the mouthpiece becomes a solid bar like a traditional mullen, but with an exaggerated curve. This curved bar rotates across the bars and lips down on to the tongue, applying pressure across the entire surface of the tongue. The flexibility of the MB 32-3 makes it very forgiving and comforting when relaxed, but offers the rider control when engaged. Sweet iron mouthpiece oxidizes and encourages salivation.
Independent Side Movement
Sweet Iron Mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
Notes: Because the tongue pressure applied by the MB 32-3 is evenly distributed across the entire tongue, this mouthpiece is considered "stronger" than the MB 04. However, its flexibility makes it a forgiving mouthpiece that works well for horses who have suffered mouth trauma or damage, or horses that tend to go behind the bit. For a ported mullen style offering more tongue relief, see the MB 06 or MB 36.
The western dee with hooks is a circular stainless steel ring with fixed attachment of the mouthpiece, with top and bottom rings (“hooks”) for headstall and rein attachment. The small loop behind the top slot accommodates a curb strap (attach with two curb hooks). The top bridle ring will fit standard ⅝" leather found on most headstalls. The bottom rein ring has recently been updated to fit slobber straps up to approximately 1 ¾". The knob on the top of the rein ring is for decoration—it has no function.
The hooks make this a much more versatile version of the dee without hooks. Attaching the headstall to the top hook holds the bit in the correct position instead of allowing it to slide around the bridle cheek pieces. Attaching the reins to the rein hooks allow the rider to lift the cheek and use the Independent Side Movement™ of the mouthpiece. Using the hooks does not add leverage but allows the rider to transition from a direct rein action to indirect action without changing the bit. Adding a curb strap (using a Myler curb strap kit) incorporates curb pressure. Curb pressure is recommended for ported mouthpieces.
Size: 3" offset ring
Action: Direct rein action when reins are not attached through rein hook. Indirect rein action when rein is fixed on rein hook.
Discipline: Primarily Western
Degree of Leverage: Little to no leverage when the hooks are used
5"
Myler Western Dee w/ Hooks MB03
$259.99 $290.00
*You are seeing a brand new design for this cheekpiece. Please be aware that some retailers may not have this style in stock yet so you may receive the original design.
Myler Stainless Steel Western Dee with Hooks, MB 03 Comfort Snaffle with Copper Roller, Level 1
The MB 03 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits with an added copper roller. The MB 03 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™. Sweet iron mouthpiece oxidizes and encourages salivation.
Independent Side Movement
Sweet Iron Mouthpiece
Curved Mouthpiece
Copper Inlay
Notes: The MB 03 is identical to the MB 02 except for a copper roller on the center barrel which can comfort horses that are restless or nervous. For more tongue relief, step up to the MB 04.
The western dee with hooks is a circular stainless steel ring with fixed attachment of the mouthpiece, with top and bottom rings (“hooks”) for headstall and rein attachment. The small loop behind the top slot accommodates a curb strap (attach with two curb hooks). The top bridle ring will fit standard ⅝" leather found on most headstalls. The bottom rein ring has recently been updated to fit slobber straps up to approximately 1 ¾". The knob on the top of the rein ring is for decoration—it has no function.
The hooks make this a much more versatile version of the dee without hooks. Attaching the headstall to the top hook holds the bit in the correct position instead of allowing it to slide around the bridle cheek pieces. Attaching the reins to the rein hooks allow the rider to lift the cheek and use the Independent Side Movement™ of the mouthpiece. Using the hooks does not add leverage but allows the rider to transition from a direct rein action to indirect action without changing the bit. Adding a curb strap (using a Myler curb strap kit) incorporates curb pressure. Curb pressure is recommended for ported mouthpieces.
Size: 3" offset ring
Action: Direct rein action when reins are not attached through rein hook. Indirect rein action when rein is fixed on rein hook.
Discipline: Primarily Western
Degree of Leverage: Little to no leverage when the hooks are used
5"
Myler Double Link Curb Chain Kit
$47.99 $50.00
Curb Chain Kit for Cheekpieces with Hooks. Includes: Double Flat Link Stainless Steel Curb Chain and 1 Pair Stainless Steel Quick Links. Works with Curb Hole or Curb Loops
Myler MBB Black Steel Flat Shank w/ Dots MB04
$323.99 $360.00
Myler MBB Black Steel 6 3/4" Medium Shank, MB 04 Low Port Comfort Snaffle, Level 2
The MB 04 is similar to the MB 02 in that it will rotate on the tongue and apply tongue pressure, however, it has a small (¼") port that introduces some tongue relief to the horse. The port allows the horse to swallow and move his tongue when he is moving forward and relaxed, which acts as a release or reward. The mouthpiece is curved, and it wraps around the bars and lips instead of pinching. Sweet iron mouthpiece oxidizes and encourages salivation.
Independent Side Movement
Sweet Iron Mouthpiece
Curved mouthpiece does not pinch lips and bars
Black steel shank will discolor over time to an antique brown
Stainless steel dots
Copper Inlay
Notes: The MB 04 provides an excellent transition from Level One to Level Two. It is suitable for a wide range of horses including green horses, experienced horses entering the Myler System, horses that have been ridden exclusively in a single-jointed mouthpiece, or horses that have not been ridden for a while needing re-schooling.
The MBB shank is a length of flat black steel curved slightly back towards the horse, with a teardrop purchase and a rein ring. The mouthpiece has a fixed attachment to the cheek with a decorative “stack.” The shank is decorated with stainless steel dots. The purchase is angled slightly away from the cheek to avoid rubbing. The black steel will discolor over time to an antique brown.
The MBB flat shank is an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. This shank uses the combination of fixed cheek and fixed rein to apply pressure to the mouth, chin and poll.
Size: 6 3/4"
Action: Indirect
Discipline: Western
Degree of Leverage: Moderate
5"
Myler Western Dee w/ Hooks MB02
$220.99 $245.00
*You are seeing a brand new design for this cheekpiece. Please be aware that some retailers may not have this style in stock yet so you may receive the original design.
Myler Stainless Steel Western Dee with Hooks, MB 02 Comfort Snaffle Wide Barrel, Level 1
The MB 02 is the Myler alternative to the traditional French link or lozenge mouthpiece commonly used in snaffle bits. The MB 02 rotates onto the tongue, applying tongue pressure, but because the mouthpiece is curved, it wraps around the bars and lips instead of pinching. The barrel in the center applies approximately the same pressure on the tongue as a traditional three-piece mouthpiece, however, the barrel distributes the pressure more kindly and creates Independent Side Movement™. Sweet iron mouthpiece oxidizes and encourages salivation.
Independent Side Movement™
Sweet Iron mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
Notes: The mouthpiece is similar to the MB 02 but the center barrel of the MB 01 is narrower, which concentrates pressure on the center of the tongue more than the MB 02. For more tongue relief, step up to the MB 04.
The western dee with hooks is a circular stainless steel ring with fixed attachment of the mouthpiece, with top and bottom rings (“hooks”) for headstall and rein attachment. The small loop behind the top slot accommodates a curb strap (attach with two curb hooks). The top bridle ring will fit standard ⅝" leather found on most headstalls. The bottom rein ring has recently been updated to fit slobber straps up to approximately 1 ¾". The knob on the top of the rein ring is for decoration—it has no function.
The hooks make this a much more versatile version of the dee without hooks. Attaching the headstall to the top hook holds the bit in the correct position instead of allowing it to slide around the bridle cheek pieces. Attaching the reins to the rein hooks allow the rider to lift the cheek and use the Independent Side Movement™ of the mouthpiece. Using the hooks does not add leverage but allows the rider to transition from a direct rein action to indirect action without changing the bit. Adding a curb strap (using a Myler curb strap kit) incorporates curb pressure. Curb pressure is recommended for ported mouthpieces.
Size: 3" offset ring
Action: Direct rein action when reins are not attached through rein hook. Indirect rein action when rein is fixed on rein hook.
Discipline: Primarily Western
Degree of Leverage: Little to no leverage when the hooks are used
5"
Myler Embossed Western Bit MB43MP
$332.99 $370.00
Myler Stainless Steel 7 1/2" Embossed Seven Shank, MB 43MP Narrow Medium Ported Barrel, Level 2-3
The MB 43MP does not rotate on to the tongue, but instead sits solidly across the bars and lips of the horse’s mouth. The port is narrower than a Level 3 mouthpiece, but still offers room for the horse’s tongue to pass under the bit. Because the port is narrow, when the reins are engaged, the horse will feel a slight pressure on the outside edges of the tongue — a gentle reminder rather than a strong reprimand. The port on this mouthpiece is only 1 ½" high, so it will apply little to no palate pressure. The MB 43MP is the mildest of the Level Two-Three mouthpieces in terms of tongue pressure, just one step below a Level 3 mouthpiece. Sweet Iron mouthpiece oxidizes and encourages salivation.
Independent Side Movement
Sweet Iron mouthpiece
Curved Mouthpiece does not pinch lips and bars
Copper Inlay
Notes: For more tongue pressure, see the MB 27LP. For more tongue relief, see the MB 41PB. For slightly less tongue relief or a lower port, see the 43LP. For the same benefits but with some palate pressure, see the MB 43HP. For the correctional version of this mouthpiece, see the MB 47 and MB 47PB. For the Level 3 version of this mouthpiece without Independent Side Movement, see the MB 12 or MB 98.
The Embossed Seven Shank is an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. This shank uses the combination of fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. The cheek is embossed with a decorative floral pattern and concho. The mouthpiece attaches to the cheek with a square end that minimizes rein motion. The purchase is angled slightly away from the cheek to avoid rubbing.
Size: 8" overall
Action: Indirect
Discipline: Western
Degree of Leverage: Moderate
5"
Myler Black Steel Seven Shank Bit MB04
$274.99 $305.00
Myler Black Steel 7" Seven Shank, MB 04 Low Port Comfort Snaffle, Level 2
The MB 04 is similar to the MB 02 in that it will rotate on the tongue and apply tongue pressure, however, it has a small (¼") port that introduces some tongue relief to the horse. The port allows the horse to swallow and move his tongue when he is moving forward and relaxed, which acts as a release or reward. The mouthpiece is curved, and it wraps around the bars and lips instead of pinching. Sweet iron mouthpiece oxidizes and encourages salivation.
Independent Side Movement™
Sweet Iron mouthpiece
Curved mouthpiece does not pinch lips and bars
Copper Inlay
Black shank will discolor over time to an antique brown
Stainless steel dots
Notes: The MB 04 provides an excellent transition from Level One to Level Two. It is suitable for a wide range of horses including green horses, experienced horses entering the Myler System, horses that have been ridden exclusively in a single-jointed mouthpiece, or horses that have not been ridden for a while needing re-schooling.
The Black Steel Seven Shank is a length of round black steel in a “7” curve, with a ring purchase and a rein ring. The mouthpiece is fixed to the cheek with a decorative “stack.” The entire shank moves independently of the mouthpiece. The purchase is slightly angled away from the cheek to avoid rubbing.
Size: 6 ¾" shank
Action: Indirect
Discipline: Western
Degree of Leverage: Mild to Moderate
5"
Myler MBB Black Steel Flat Shank w/ Dots MB33
$323.99 $360.00
Myler Black Steel 6 3/4" MBB Medium Shank, MB 33 Medium Wide Ported Barrel, Level 3
The MB 33 is the mildest Myler mouthpiece in terms of tongue pressure. The generously wide port allows room for the tongue to pass almost completely under the bit. Because this mouthpiece does not rotate on to the tongue and the port is wide, it applies little to no tongue pressure, working primarily off the lips and bars. The port on this mouthpiece is only 1 ½" high, so it will apply little to no palate pressure. Because the MB 33 offers such a high degree of tongue relief, the horse that goes well in this mouthpiece has a trustworthy and consistent disposition, and is trained to work off the leg and seat as well as the hands. Sweet iron mouthpiece oxidizes and encourages salivation.
Independent Side Movement
Sweet Iron Mouthpiece
Curved Mouthpiece
Black shank will discolor over time to an antique brown
Stainless steel dots
Copper Inlay
Notes: For a slight increase in tongue pressure, see the MB 43LP or MB 43MP. For same tongue relief without Independent Side Movement, see the MB 16 (Western only). For the same tongue relief and Independent Side Movement, but with a slight degree of collapse, see the MB 05. For more generous tongue relief, see the MB 16PB.
The MBB shank is a length of flat black steel curved slightly back towards the horse, with a teardrop purchase and a rein ring. The mouthpiece has a fixed attachment to the cheek with a decorative “stack.” The shank is decorated with stainless steel dots. The purchase is angled slightly away from the cheek to avoid rubbing. The black steel will discolor over time to an antique brown.
The MBB flat shank is an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. This shank uses the combination of fixed cheek and fixed rein to apply pressure to the mouth, chin and poll.
Size: 6 3/4"
Action: Indirect
Discipline: Western
Degree of Leverage: Moderate
5"
Myler MBL Short Shank MB33
$323.99 $360.00
Myler Stainless Steel 5 1/2" MBL Short Shank, MB 33 Medium Wide Ported Barrel, Level 3
The MB 33 is the mildest Myler mouthpiece in terms of tongue pressure. The generously wide port allows room for the tongue to pass almost completely under the bit. Because this mouthpiece does not rotate on to the tongue and the port is wide, it applies little to no tongue pressure, working primarily off the lips and bars. The port on this mouthpiece is only 1 ½" high, so it will apply little to no palate pressure. Because the MB 33 offers such a high degree of tongue relief, the horse that goes well in this mouthpiece has a trustworthy and consistent disposition, and is trained to work off the leg and seat as well as the hands. Sweet iron mouthpiece oxidizes and encourages salivation.
Independent Side Movement
Sweet Iron Mouthpiece
Curved Mouthpiece
Copper Inlay
Notes: For a slight increase in tongue pressure, see the MB 43LP or MB 43MP. For same tongue relief without Independent Side Movement, see the MB 16 (Western only). For the same tongue relief and Independent Side Movement, but with a slight degree of collapse, see the MB 05. For more generous tongue relief, see the MB 16PB.
The MBL Shank is a length of flat stainless steel curved slightly back towards the horse, with a teardrop purchase and a rein ring. The mouthpiece attaches loosely to the cheek with a small decorative stack that allows ⅛" of slide, just enough to allow more tongue relief. The purchase is angled slightly away from the cheek to avoid rubbing. The MBT has the patented Independent Swivel Cheek, where the purchase, mouthpiece and shank all move independently of each other.
The MBL is an indirect (curb) rein action designed to be used with a curb strap which attaches to the purchase. The MBL uses the combination of fixed cheek and fixed rein to apply pressure to the mouth, chin and poll. Recommended for use with ported mouthpieces.
Size: 5 1/2" Shank
Action: Indirect
Discipline: Western
Degree of Leverage: Mild